Sugatsune KAKU Series 4-7/16" (113 mm) Center to Center Dull Chrome Pull, - KAKU-A159

KAKU-A PULL 113MM C/C DULL CHROME Use

KAKU-A PULL 113MM C/C DULL CHROME is a brass handle from the Sugatsune KAKU-A Series designed as a decorative pull for cabinet and furniture doors or drawers, so it gives projects a consistent, coordinated look across multiple fronts. The dull chrome finish provides a muted metallic appearance that suits jobs calling for modern hardware without high reflectivity, helping designs read clean under varied lighting. The center to center dimension of 4 inches aligns with common boring patterns, which simplifies layout on new work and replacement situations using that spacing. Overall length of 4-3/8 inches keeps the pull compact on smaller fronts while still spanning enough width for a comfortable grip. A projection of 1-3/8 inches stands the handle off the face, creating hand clearance that supports everyday use on frequently accessed doors. A width of 3/8 inch keeps the profile slim, which helps the pull sit visually light on narrow rails and drawer fronts.

Key KAKU-A Series Pull Details For Projects

• The KAKU-A Series designation groups this pull with other Sugatsune KAKU-A designs, which helps maintain visual continuity when the same series is used on different cabinet sizes throughout a space.
• The brass material gives the pull a solid metal construction, which supports a sturdy feel in hand on doors and drawers that see repeated daily opening and closing.
• The dull chrome finish on the brass base creates a low-gloss metallic surface, which matters where designers want chrome tone without strong reflections across casework faces.
• The 4 inch center to center dimension aligns with a widely used drilling standard, which streamlines jig setup, boring, and repeat installations across a run of cabinets.
• The 4-3/8 inch (111 mm) overall length provides slightly more width than the hole spacing, which leaves a small margin at each end that helps cover minor drilling variances on site.
• The 1-3/8 inch projection stays within a typical reach distance, which reduces the chance of snagging while still allowing fingers to wrap behind the pull comfortably.

Installation Dimensions And Handle Layout Basics

The 4 inch center to center spacing defines the drilling layout for this pull, so boring two holes at that distance sets the handle correctly for the KAKU-A159 pattern. The 4-3/8 inch overall length means the ends extend slightly beyond the mounting points, which helps cover small layout tolerances along the rail. The 3/8 inch width keeps the footprint narrow across the face, giving room on slimmer drawer fronts while still presenting a clear grip line. Projection of 1-3/8 inches creates usable finger clearance behind the pull, supporting comfortable operation on doors that swing toward the user and drawers that are pulled straight out. The 8-32 x 1 inch screw size matches the threaded inserts of the pull, so the fastening method ties directly to the brass body.

Where This Sugatsune KAKU-A159 Pull Fits Best

Sugatsune KAKU Series Pull For Cabinets

The Sugatsune KAKU Series 4-7/16 inch (113 mm) center to center dull chrome pull is identified as part number KAKU-A159, which ties it to the KAKU-A Series family used in decorative cabinet hardware layouts. The 113 mm center to center metric dimension corresponds to the 4 inch spacing described, so it serves both metric and imperial planning on shop drawings. Its brass construction places it in the decorative hardware and moldings category under handles and pulls, positioning it for use on cabinet doors, drawers, and similar casework where a metal pull is required. The dull chrome finish helps the KAKU-A159 sit comfortably in projects that favor cooler metal tones, such as modern kitchens, baths, or built-ins that specify chrome-colored hardware without bright sheen. With an overall length of 4-3/8 inches, the pull suits standard cabinet widths while avoiding overhang on narrow drawer faces, which supports consistent alignment across mixed cabinet sizes.

Dimensions That Support Repeatable Handle Results

The 4 inch center to center measurement on this pull supports repeatable results because installers can rely on a single drilling distance when running multiple fronts, which reduces layout changes and speeds through-runs on site or in the shop. Its 111 mm (4-3/8 inch) overall length provides slight overhang past the hole centers, which helps visually center the pull even if the boring varies by a small amount along the rail. The 1-3/8 inch projection creates enough depth for fingers to get behind the pull during operation, which matters on heavier cabinet doors or drawers that need a confident grip. The 3/8 inch width focuses the contact area into a slim bar, which makes alignment along door stiles and drawer rails straightforward and provides a clear reference edge when lining up parallel to the cabinet front. The 8-32 x 1 inch screw size matches a common machine screw standard, which integrates smoothly with typical cabinet construction where those threads are expected.

Common Questions About The KAKU-A159 Pull

Selecting This Dull Chrome Pull For Your Job

The KAKU-A PULL 113MM C/C DULL CHROME combines a brass body, dull chrome finish, and 4 inch center to center layout, so it fits cabinet projects calling for metal pulls with a restrained chrome look. The 4-3/8 inch overall length and 1-3/8 inch projection give a compact yet usable grip profile that works across doors and drawers sharing the same drilling pattern. With the KAKU-A159 part number tying it directly to the Sugatsune KAKU-A Series, this pull supports consistent hardware selection wherever that series is specified throughout a project.