MKZ PULL 8MM C/C POLISHED BRASS identifies this Sugatsune America MKZ Series pull as having an 8 mm center to center dimension, which sets the mounting hole spacing so you can align it with pre-drilled cabinet or drawer fronts. The pull is part of the MKZ collection, so it matches other hardware in the same series when you are keeping a consistent look across a project. The material is zinc die cast, which gives the pull a solid, uniform body that handles repeated everyday operation on doors and drawers. The polished brass finish provides a bright metallic surface that reads as decorative hardware, tying into brass hinges or other brass components on the job. The product name describes it as a pull, so it serves as the handhold used to open and close cabinet doors or drawers in a decorative hardware installation.
The MKZ-S/PB manufacturer part number ties this pull directly to Sugatsune Americas MKZ Series, so you can match it to layout drawings or hardware schedules by that exact code. The 8 mm center to center specification defines where the two mounting points sit relative to each other, which drives your hole pattern on doors and drawers. The screw size of M4 x 25 mm sets both the thread standard and nominal length, so you size your pilot holes and cabinet front thickness around that metric fastener. The polished brass finish on the zinc die cast body means the visible surface stays consistently brass colored from edge to edge, supporting a uniform appearance when multiple pulls are mounted in a row.
This pull is categorized under Decorative Hardware & Moldings and specifically under Handles and Pulls, so it is intended for cabinet and similar furniture applications where a fixed handhold is needed. The MKZ collection reference in the web description connects it to the broader MKZ family, which matters when you are outfitting entire cabinet runs with coordinated parts. Being a Sugatsune America product aligns it with hardware commonly specified in woodworking and cabinet shops, so it fits into professional-grade projects that call out Sugatsune by name. The polished brass finish presents as traditional brass-colored hardware, which suits installations that echo brass hinges, catches, or other brass-finished components on doors and drawers.
The 8 mm center to center dimension is the key layout number for the MKZ PULL 8MM C/C POLISHED BRASS, because it defines the spacing you follow when drilling two mounting holes across a full run of doors or drawer fronts. Having that dimension tied to the product name helps you quickly match the pull to drilling jigs or shop templates built around that spacing. The zinc die cast construction gives each pull a consistent shape, so when you line up multiple MKZ Series pulls, they sit evenly against the cabinet fronts. The specified M4 x 25 mm screw size pairs the pull with a common metric fastener length, which supports predictable thread engagement through typical cabinet front thicknesses. With the finish called out as polished brass, you know every pull in the MKZ Series with that finish will show the same brass tone, keeping long runs of hardware visually aligned.
The MKZ-S/PB is a Sugatsune America MKZ Series pull made from zinc die cast with a polished brass finish, so it functions as a decorative handle on cabinet doors or drawers.
The 8 mm center to center dimension describes the spacing between the pulls mounting points, which sets the distance between drilled holes on doors or drawer fronts.
The zinc die cast construction forms a solid pull body, which supports consistent feel and performance when installed on cabinets that see frequent opening and closing.
The polished brass finish gives the pull a bright brass-colored appearance, allowing it to coordinate visually with other polished brass decorative hardware in the project.
This MKZ Series pull uses M4 x 25 mm screws, so the mounting interface is based on an M4 metric thread with a 25 mm nominal screw length.
The MKZ collection designation groups this pull with other MKZ Series parts, which helps you specify matching hardware across cabinets using the same visual style.
The MKZ PULL 8MM C/C POLISHED BRASS description defines this Sugatsune America MKZ Series pull by its 8 mm center to center layout, zinc die cast material, polished brass finish, and M4 x 25 mm screw size. Those specifics let you align drilling, finish selection, and hardware scheduling around a clearly identified handle pattern. For cabinet or furniture work that calls for polished brass decorative hardware in the MKZ collection, this MKZ-S/PB pull offers a defined mounting dimension and material construction you can plan into your next job.