Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune MKZ-S/SB is a compact rectangular cabinet pull from the MKZ series, designed for doors and drawer fronts where an 8 mm center-to-center spacing is required and standard pull dimensions would overwhelm the face.
Most cabinet pulls operate at 96 mm, 128 mm, or larger centers. The MKZ pull at 8 mm centers is a different tool for a different situation. It fits flush-inset jewelry cabinet doors, spice drawer fronts, small appliance garage pulls, and display case hardware where the front is narrow enough that a standard two-hole spacing would run off the edge. It also suits furniture-scale cabinetry and specialty millwork where the design calls for hardware that does not visually dominate the piece. If the existing hole pattern is at 8 mm and replacement hardware is needed, this is one of very few pulls in the market drilled to that spacing.
The pull is cast in zinc and finished in Satin Brass. The satin surface texture takes the brightness off the gold tone, so the pull reads as warm rather than flashy under cabinet lighting. Against natural wood, painted fronts, or brass-accented cabinetry programs, the finish holds its own without competing with the surrounding materials. Zinc construction gives the part consistent shape and a surface that accepts the plated finish evenly across the small face.
Cabinet shops building specialty furniture, display cabinets, or jewelry armoires find this pull useful when the front dimensions leave no room for a standard hole pattern. Interior designers specifying a consistent brass hardware program across mixed cabinet sizes can use it where small fronts would otherwise require a knob. Contractors working on a refit where the existing 8 mm holes cannot be redrilled to a wider spacing will find it a direct replacement rather than a patching exercise. The contemporary rectangular profile keeps it neutral enough to work across traditional brass schemes and modern slab-front kitchens alike.
This pull is made for small cabinet fronts, specialty furniture, and display case hardware where a standard 96 mm or wider hole pattern would not fit. The 8 mm spacing keeps the hardware proportional to the front.
At 9/16 inch (14 mm), the pull stands far enough off the face for a comfortable fingertip grip without adding bulk that would look out of scale on a small front.
No. Satin Brass has a brushed, lower-sheen surface. Polished brass is bright and reflective. The two read quite differently, especially under kitchen or cabinet lighting.
Yes. The rectangular form and two-hole mounting work on both cabinet doors and drawer fronts where the 8 mm hole spacing is appropriate.
When the front is too narrow for a standard pull and a knob is not the right form, the MKZ in Satin Brass fills the gap with a clean rectangular profile and a warm finish that coordinates across a brass hardware program.