Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune RD-45/SN is a compact tab pull from the RD series, designed for cabinet doors and drawer fronts where a small, flush-reading pull is the right fit. It mounts on 1-1/4 inch (32 mm) centers and finishes in Satin Nickel over zinc.
A 1-1/4 inch center-to-center pull occupies a different part of the hardware market than the standard 96 mm or 128 mm bar pull. At this spacing, it suits small drawer fronts, narrow spice pulls, jewelry drawers, and shallow upper cabinets where a larger pull would overpower the front or simply not fit. It also suits replacement situations: if the existing holes are drilled at 32 mm, this pull drops straight onto them without any new drilling. In furniture-style cabinetry and bath vanities with narrow drawer stacks, tight center-to-center spacing is common, and hardware options at this dimension are more limited than at standard spacings. That scarcity makes a well-finished option worth noting.
The pull is cast in zinc and finished in Satin Nickel. The satin surface diffuses light evenly across the tab face rather than throwing a hard reflection, which suits a contemporary kitchen or bath where the hardware is meant to be present without being prominent. Satin Nickel is a broadly neutral finish in the Silver Tone family, and it coordinates readily with brushed stainless appliances and fixtures already common in residential and light commercial cabinetry. Zinc is the standard base material across this segment and gives the pull consistent weight and a clean casting edge.
This is a pull for situations where the front is small, the hole pattern is already set at 32 mm, or both. Designers specifying shallow drawer stacks for a bath vanity or a bedroom built-in will find the compact tab form appropriate where a bar pull would read as oversized. Cabinet shops replacing hardware on an existing run drilled to this spacing will find it a direct fit. Homeowners updating a kitchen with narrow spice or tray drawers can match existing holes without patching. Because it belongs to the RD series, companion pieces in the same series are available for a consistent hardware program across the installation.
It is less common than 96 mm or 128 mm but appears regularly on small drawer fronts, spice pull-outs, jewelry drawers, and furniture-style cabinetry. If you are replacing existing hardware, measure between the centers of your current holes to confirm before ordering.
A tab pull is a small, low-profile grip, typically a flat plate or a short projecting tab, suited to narrow fronts. A bar pull is a longer cylindrical or squared grip on two posts. The tab form keeps the hardware scale closer to the door front it sits on.
Satin Nickel is a silver-tone finish that reads close to brushed stainless in most lighting conditions. Finishes from different manufacturers are never guaranteed to match exactly, but Satin Nickel is among the most neutral choices for a kitchen already running stainless fixtures.
Yes. The RD series includes additional sizes and configurations that share the same design language, so a consistent hardware program is possible across different front sizes in the same installation.
When the hole pattern is 32 mm and the front is narrow, this Satin Nickel tab pull from Sugatsune's RD series delivers a clean, contemporary grip without overpowering the cabinetry it sits on.