Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune TMT-20 knob defines the product as a brass decorative knob from the Sugatsune TMT Series, so you know you are working with a purpose-built piece of decorative hardware rather than a generic fastener. The product name states a 1 inch (25 mm) diameter identity for the knob, giving a visual sense of scale for drawer and door layouts where consistent knob size keeps fronts looking aligned. The SAP description and web description confirm the knob material as brass, so you get a solid metal component that feels substantial in hand during day-to-day use. The web description states a 24K gold plated finish, which creates a bright metallic surface that stands out on face frames and drawer fronts. The category listing as decorative hardware and moldings and knobs places this part squarely in cabinet and furniture hardware use, helping it slot into hardware schedules for those projects.
The web description calls this product a knob, which means it is designed to mount to a drilled hole in a door or drawer front so the installer can fasten it from the rear for a clean exterior face. The screw size is specified as M4 x 30 mm, giving a clear thread type that matches common cabinet drilling practices where metric machine screws are standard. The product name calls out the TMT-20 part number, so each knob can be referenced precisely on drawings, cut lists, and installation sheets to avoid mix-ups with other decorative hardware lines. The category placement as decorative hardware and moldings and knobs also signals that this piece is intended for visible locations on cabinets and casework, where centered mounting and repeat spacing matter to the finished look.
The product name and brand fields together identify this as the Sugatsune TMT Series TMT-20 knob from Sugatsune America, positioning it for use wherever a decorative brass knob is specified in the hardware schedule. The category listing as decorative hardware and moldings and knobs points this part toward cabinetry, furniture, and built-in woodworking projects where a compact, round pull is needed. The SAP description notes a 20 mm diameter, which creates a modest footprint that suits smaller drawer faces or narrow stiles without overwhelming the proportions of the panel. At the same time, the product name references a 1 inch (25 mm) diameter identity, aligning the knob with common imperial expectations for cabinet knob sizing when layouts are being planned. The 24K gold plated wording in the web description ties the finish directly to projects that call for a bright, gold-tone appearance on visible hardware.
The web description confirms that the knob is made of brass, so the underlying metal gives consistent weight and feel across all installed pieces, which helps doors and drawers present a unified hardware look. The 24K gold plated finish, also specified in the web description, establishes a clear finish callout that can be repeated across schedules so every knob on the job matches in color and sheen. The M4 x 30 mm screw size listed in the web description defines the connection interface, which supports predictable drilling and fastening methods when casework is being produced in volume. The TMT-20 manufacturer part number ensures that when installers or shops reference this piece, they are tying back to the exact same Sugatsune TMT Series knob, keeping replacements aligned to the original selection. The classification under decorative hardware and moldings and knobs confirms its intent as a visible pull point, which guides placement in repeating rows or grids for a clean finished layout.
The Sugatsune TMT-20 knob is described as brass, giving it a solid metal construction that provides a substantial feel on cabinet doors and drawers.
The TMT Series TMT-20 knob uses a 24K gold plated finish, creating a bright gold-tone surface that stands out on visible cabinet and furniture fronts.
The TMT-20 knob is noted as 1 inch (25 mm) diameter in the product name and 20 mm in the SAP description, indicating a compact, round pull size.
The Sugatsune TMT-20 knob is specified with an M4 x 30 mm screw size, defining the thread and length used to fasten it through cabinet doors or drawers.
The Sugatsune TMT-20 knob is categorized under decorative hardware and moldings and knobs, marking it as a decorative pull point for cabinetry and furniture.
The TMT-20 knob is listed under the TMT collection, allowing it to be matched with other TMT Series decorative hardware when coordinating a project.
The web description identifies this brass knob with a 24K gold plated finish and an M4 x 30 mm screw size, so its core construction and fastening details are clearly defined for project planning. The product name and manufacturer part number TMT-20 tie it directly to the Sugatsune TMT Series, giving a specific reference point when you are aligning hardware choices across multiple cabinets or rooms. The decorative hardware and moldings and knobs category, combined with the stated diameter, positions this knob as a compact, visible pull suited to cabinet doors and drawers. With these details specified, the Sugatsune TMT-20 knob can be selected and scheduled where a brass, gold-tone decorative knob is required.
