Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune TS Series knob gives you a compact, round pull point for cabinet fronts using a measured 1 inch diameter face. That defined diameter provides a predictable grip area, which helps keep layouts consistent when you repeat the knob across multiple doors or drawers on the same run.
The knob is built from brass, so the solid metal construction creates a weight and feel suited to decorative hardware on furniture or cabinetry while supporting repeated daily use. Its satin nickel finish tones down reflectivity compared with polished surfaces, which can help the knob blend with other nickel-finished components while reducing visible fingerprints on light-use cabinetry.
The projection is set at 15/16 inch, giving fingers enough clearance between the knob and the cabinet surface while still holding the knob close to the face frame or panel. That controlled stand-off helps reduce snag points and supports tight visual lines on face-frame or frameless installations.
This knob is part of the TS collection, so the styling and finish coordinate with other TS Series pieces where consistent appearance across a project matters.
The TS-36 satin nickel knob uses an M4 x 10 screw size connection, so the internal thread is set up for that metric machine screw length in typical cabinet door or drawer fronts. This gives you a defined interface when drilling pilot holes and planning through-bore locations on panels that follow common cabinet thicknesses.
Its 15/16 inch projection controls how far the knob stands off the furniture or cabinet face, limiting the reach into walk paths while still allowing a clear grip. That projection works with the 1 inch diameter face to keep the hand contact area centered over the mounting point, which supports straightforward alignment during installation.
The brass construction behind the satin nickel finish provides a stable base around the M4 interface, supporting the load at the thread connection when the knob is pulled repeatedly on doors and drawers.
The TS-36 satin nickel knob from the TS collection is suited to cabinet doors and drawer fronts where a round, compact pull is preferred. With its 1 inch diameter, the knob presents a modest footprint on the face panel, which helps on smaller drawers or narrow stiles where space between pieces of hardware is limited.
The 15/16 inch projection balances clearance and proximity to the cabinet surface, providing enough room for fingers without pushing the hardware excessively into the room. That dimension is useful on kitchen or bath runs where doors need to open without hardware clashing across adjacent fronts.
Its brass core under the satin nickel finish keeps the knob in a metal-to-metal relationship with the M4 x 10 screw size, which supports a repeatable threaded connection wherever this knob is fitted along a row of cabinets.
The defined 1 inch diameter of this Sugatsune TS Series knob lets you plan grid lines and handle centers knowing each knob presents the same face size. This repeatability matters when you align multiple TS-36 satin nickel knobs across upper and lower cabinets where visual continuity is part of the finished look.
The specified M4 x 10 screw size means the knob is engineered around a standard metric thread, so each mounting point uses the same interface. That uniform sizing simplifies drilling patterns because the bore can be planned around a single diameter and thread relationship across all installed knobs.
The 15/16 inch projection places the grip zone at a predictable distance from the cabinet face, important when doors swing past adjacent fronts. Consistent stand-off helps prevent interference between neighboring TS Series hardware in tight configurations.
The satin nickel finish shared within the TS collection gives this brass knob a coordinated appearance with other TS components. Matching finish and style supports projects where decorative hardware and moldings from Sugatsune need to carry the same visual language through different cabinet zones.
The TS-36 knob has a 1 inch diameter face, which establishes a compact pull area and helps keep hardware proportions controlled on smaller cabinet doors and drawer fronts.
The Sugatsune TS Series knob projects 15/16 inch from the surface, providing functional finger clearance while holding the knob close to the cabinet or furniture face.
The TS-36 knob is made from brass, giving the hardware a solid metal body that supports the threaded connection and delivers a substantial feel on cabinet fronts.
The TS-36 brass cabinet knob is specified with an M4 x 10 screw size, so the internal thread is matched to that metric machine screw for cabinet door and drawer mounting.
The satin nickel finish on this TS Series knob offers a muted metallic look that coordinates with other satin nickel hardware, supporting a consistent visual theme across cabinets.
The TS-36 Sugatsune knob is part of the TS collection, allowing the knob to visually coordinate with other TS Series hardware on the same installation.
The Sugatsune TS Series knob pairs a 1 inch diameter face with 15/16 inch projection, brass construction, and a satin nickel finish, giving you a defined set of dimensions and materials to plan around. With the M4 x 10 screw size interface built into the TS-36, layout and drilling patterns can follow a consistent standard across a full cabinet run. For projects that call for coordinated satin nickel hardware from the TS collection, this knob aligns appearance and fit so you can carry the same look from one front to the next.