Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DSI-4501 sliding door pull is a recessed, square stainless steel pull designed for sliding door applications where a flat front is preferred. The front plate is spring loaded to appear flush when not in use, so the door face stays smooth while still providing a functional handhold when needed.
This pull is 2-15/16 inch in length, giving a compact gripping area that suits smaller sliding panels or tight layouts where every inch of face space matters. The pull is part of Sugatsune America sliding door hardware, aligning with jobs that call for purpose-built builders hardware.
Material is 304 stainless steel, which supports use in typical interior or light-duty environments where corrosion resistance and a stable finish are important. The satin stainless steel finish offers a muted appearance that blends with other satin stainless sliding door hardware for a consistent look across a project.
This recessed door pull is built for sliding door hardware applications where the hardware needs to sit into the panel. The square, recessed design lets the pull occupy a pocket in the door thickness, which supports smooth passing of one panel past another.
The front plate being spring loaded to appear flush directly affects face alignment. When the pull is not in active use, the plate sits nearly even with the surrounding door surface, helping sliding doors move past frames or adjacent panels without a protruding grip catching.
The 2-15/16 inch length establishes how much vertical or horizontal space the pull occupies on the panel, which is important when planning cutouts and spacing it relative to other sliding door hardware on the face.
This recessed, square stainless steel pull suits sliding door situations that call for hardware from the Builders Hardware and Sliding Door Pulls categories. Its recessed configuration is appropriate where a projecting knob or handle could interfere with the travel of an adjacent panel or wall.
The product belongs to the Sliding Door Hardware class, positioning it for use on sliding doors rather than hinged doors. Because the pull is 2-15/16 inch in length, it matches layouts that require a compact pull, such as narrow sliding cabinet doors or smaller architectural panels that cannot accept long pulls.
The satin 304 stainless steel build makes the pull relevant in interiors that already use stainless door and cabinet components. Matching material and finish across hardware helps installers coordinate pulls with other stainless items from Sugatsune America or similar builders hardware on a project.
The square shape of the recessed opening affects how users engage the pull, offering straight edges for a fingertip grip that aligns with the geometry of square-cut mortises typically used in sliding door fabrication.
The spring loaded front plate influences daily use, because the plate presents a flat, almost continuous face when idle and moves only when engaged by the user. This behavior helps preserve the visual simplicity of the door face while still giving a defined pulling edge when sliding the door.
By using 304 stainless steel with a satin finish, this pull combines a known stainless alloy with a subdued sheen, which contributes to stable appearance and helps the hardware visually integrate with other satin stainless sliding door components throughout the installation.
The 2-15/16 inch length sets a predictable dimension for cutout planning, so fabricators can rout or machine a pocket sized around this pull and repeat that size consistently across multiple sliding doors in a run.
The fact that this hardware is identified as a recessed door pull and as part of Sliding Door Hardware clarifies its role in the assembly: it provides the user interface for operating the sliding motion, without adding unnecessary projection that could affect clearances.
Being supplied under the Sugatsune America brand signals that it falls within a recognized line of builders hardware, which helps specifiers align this pull with other Sugatsune sliding door pulls when building out a coordinated sliding system.
This product is identified as a recessed door pull in the Sliding Door Hardware class, so it is intended for sliding door applications that use builders hardware pulls.
The pull length is 2-15/16 inch, which defines the footprint on the door and guides cutout sizing when preparing a pocket for the recessed pull.
The door pull is made from 304 stainless steel, providing a commonly used stainless alloy for sliding door pulls in typical interior conditions.
The pull has a satin stainless steel finish, which gives a muted surface appearance suitable for coordinating with other satin stainless builders hardware.
The front plate is spring loaded to appear flush when not in use, so the door face looks clean while still allowing the plate to move when a user grips the pull.
The manufacturer part number is DSI-4501-75, which identifies this specific recessed, square stainless steel sliding door pull from Sugatsune America.
This recessed, square stainless steel door pull from Sugatsune America combines a 2-15/16 inch length with a spring loaded front plate that appears flush when idle, fitting sliding door projects that require a compact, recessed grip in 304 satin stainless steel.
For sliding door hardware work where the door face needs a flat appearance and a defined pulling point, this DSI-4501 sliding door pull provides a clear specification built around recessed design, stainless construction, and a consistent satin finish.