
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Easy-Set Pocket-Hole Drill Bit gives installers and woodworkers a direct replacement setup for Kreg pocket-hole jigs, so pocket-hole boring stays accurate and consistent across repetitive cabinet or furniture work. This Kreg Tool stepped drill bit pairs with a stop collar and thickness gauge/wrench to control hole depth in materials from 1/2 inch to 1-1/2 inches thick, which supports a wide range of common plywood and solid stock builds. Easy-set etched markings on the drill bit identify settings for 1/2 inch, 3/4 inch, and 1-1/2 inch materials, so the correct depth is easy to dial in at the bench or on site. The stop collar window aligns with those etched markings, which lets you match the collar position directly to the material setting for repeatable results. The thickness gauge measures material thickness and doubles as a hex wrench, keeping setup and adjustment close at hand during drilling.
This Kreg Tool stepped drill bit system uses its etched markings, collar window, and thickness gauge together to streamline pocket-hole setup. The installer first uses the thickness gauge function to read material thickness between 1/2 inch and 1-1/2 inches, which identifies which etched marking to use on the bit. With the marking known, the stop collar slides over the bit until the collar window lines up with that etched line, locking in the drilling depth that matches the material. Because the collar window references the same 1/2 inch, 3/4 inch, and 1-1/2 inch markings, the pocket-hole depth remains coordinated with the stock thickness setting from the gauge. The built-in hex wrench in the gauge then tightens the stop collar, tying measurement, depth setting, and locking into one workflow at the jig.
The Kreg KPHA308 setup is a direct replacement for the stepped drill bit, stop collar, and thickness gauge used with the Kreg Pocket-Hole Jig 320 and 310, so it fits naturally into workflows built around those handheld jigs. It also works with Kreg K5, K4, K3, R3, Mini, and Foreman jigs, allowing the same bit, collar, and gauge arrangement to serve across multiple Kreg pocket-hole stations in a shop. Because the bit handles materials from 1/2 inch to 1-1/2 inches thick, it applies across casework, face frames, and general shop fixtures that fall in that stock range. The etched markings for 1/2 inch, 3/4 inch, and 1-1/2 inch pair with the collar window to support common cabinet and furniture thicknesses, so drill setups stay aligned whether work is on-site or in the shop.
The easy-set etched markings on the drill bit convert specific material thicknesses into clear visual stops, which reduces reliance on separate measurements for pocket-hole depth. The stop collar window referencing those same etched lines means the installer slides the collar until the window frames the chosen thickness mark, then tightens using the built-in hex wrench in the thickness gauge. This ties depth control directly to the printed settings, so repeated setups for 1/2 inch, 3/4 inch, or 1-1/2 inch stock stay consistent from part to part. Because the thickness gauge doubles as both measuring tool and hex wrench, the workflow moves from checking material thickness to locking the collar without changing tools. This integrated approach helps pocket-hole production on Kreg Pocket-Hole Jig 320, 310, K5, K4, K3, R3, Mini, and Foreman remain steady when replacing a worn original bit.
The Kreg KPHA308 drill bit works with Kreg Pocket-Hole Jig 320, 310, K5, K4, K3, R3, Mini, and Foreman, so one bit setup can serve multiple Kreg jig stations.
The Kreg Tool stepped drill bit works with materials from 1/2 inch to 1-1/2 inches thick, letting you use one setup across many cabinet and furniture stock sizes.
The easy-set etched markings for 1/2 inch, 3/4 inch, and 1-1/2 inch show where to position the stop collar, so pocket-hole depth aligns directly with the material thickness.
The stop collar window lines up with the etched markings on the drill bit, so you slide the collar until the window frames the chosen setting for quick, repeatable depth control.
The thickness gauge measures stock thickness and acts as a built-in hex wrench, so you can size the material and tighten the stop collar using the same tool.
This Kreg Tool assembly is a direct replacement for the stepped drill bit, collar, and gauge used with Kreg Pocket-Hole Jig 320 and 310, restoring the original drilling setup.
The Kreg Tool KPHA308 Easy-Set stepped drill bit with stop collar and thickness gauge is built to restore the original boring setup on Kreg Pocket-Hole Jig 320 and 310 and to work across K5, K4, K3, R3, Mini, and Foreman. Its etched depth markings, collar window, and combined thickness gauge/hex wrench connect material thickness directly to pocket-hole depth, which supports consistent joinery across repeated cabinet or furniture runs. For shops and installers who depend on Kreg pocket-hole systems, this configuration keeps hole depth, material range, and jig compatibility aligned around a single, easy-set drill bit assembly.
Sold In: 1 Each