
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kreg Easy-Set stop collar is a stop collar and material-thickness gauge/wrench for Kreg Pocket-Hole Jigs that controls drilling depth and sets bit position for pocket-hole work. The tool works with materials from 1/2 inch to 1-1/2 inches thick, so it covers common casework, face frames, and furniture stock without changing methods between jobs. Easy-set etched markings for 1/2, 3/4, and 1-1/2 inch materials give clear visual reference points, which speeds setup when moving between different panel or frame thicknesses. The integrated thickness gauge easily measures material thickness from 1/2 inch to 1-1/2 inches, turning the same tool into a measuring reference so there is no need to switch to a separate gauge for every setup. A built-in hex wrench in the gauge locks and adjusts the collar on the drill bit, so depth changes stay at hand during assembly runs and adjustments remain consistent across multiple holes.
The stop collar and material-thickness gauge/wrench for Kreg Pocket-Hole Jigs centers drilling depth control around the same tool that measures stock, so setup starts by using the thickness gauge to measure materials from 1/2 inch to 1-1/2 inches. Those readings then match the easy-set etched markings for 1/2, 3/4, and 1-1/2 inch materials, which guides where to position the collar on the drill bit when preparing for pocket-hole drilling. The built-in hex wrench in the gauge tightens the collar on the bit at the chosen mark, holding the depth setting for repeated holes on identical parts. By tying measurement, marking reference, and collar tightening together, the process keeps drilling depth aligned with the actual panel or frame thickness across a run of workpieces.
The stop collar and material-thickness gauge/wrench is identified by manufacturer part KPHA330, which ties it directly to the Kreg Tool pocket-hole system layout. As a direct replacement for the drill bit component on Kreg Pocket-Hole Jig 320 and 310, it fits into the workflow of those jigs when the original part is worn or missing, so drilling depth can return to the factory-style reference. The same stop collar and gauge also works with K5, K4, K3, R3, Mini, and Foreman jigs, allowing one part number to operate across multiple Kreg Pocket-Hole Jig setups in a shop. Because it works with materials from 1/2 inch to 1-1/2 inches thick, it can stay on the drilling station while moving between different jig bodies that handle similar thickness ranges.
The easy-set etched markings for 1/2, 3/4, and 1-1/2 inch materials give fixed, readable positions on the stop collar, so installers can return to standard settings quickly after custom adjustments. When paired with the thickness gauge that easily measures material thickness from 1/2 inch to 1-1/2 inches, those etched markings help align drill depth with the actual board, which keeps pocket holes consistently placed within the material stack. The built-in hex wrench on the gauge keeps tightening and loosening of the collar controlled by the same tool, which supports consistent clamping of the collar at each mark and limits variation from using different drivers. As a direct replacement for drill bit setups on Kreg Pocket-Hole Jig 320 and 310, and as a part that also works with K5, K4, K3, R3, Mini, and Foreman jigs, the KPHA330 part number gives shops a single reference piece to standardize pocket-hole drilling depth across multiple benches.
The Kreg KPHA330 stop collar and material-thickness gauge/wrench controls pocket-hole drilling depth and measures stock thickness, so drill bit position matches the material used with Kreg Pocket-Hole Jigs.
The stop collar and thickness gauge works with materials from 1/2 inch to 1-1/2 inches thick, covering common cabinet, carcass, and framing stock within that range.
Easy-set etched markings for 1/2, 3/4, and 1-1/2 inch materials give fixed reference points on the collar, so repeated setups return to the same drilling depth quickly.
The KPHA330 stop collar and gauge is a direct replacement for drill bits on Kreg Pocket-Hole Jig 320 and 310 and also works with K5, K4, K3, R3, Mini, and Foreman jigs.
The built-in hex wrench on the thickness gauge tightens and loosens the stop collar at the drill bit, so depth changes happen at the jig without reaching for a separate tool.
The KPHA330 stop collar and gauge is a direct replacement for the drill bit setup supplied with Kreg Pocket-Hole Jig 320 and 310, restoring original-style depth control.
The Kreg Easy-Set stop collar and material-thickness gauge/wrench brings depth control, thickness measurement, and bit adjustment together around part number KPHA330, which fits Kreg Pocket-Hole Jig 320, 310, K5, K4, K3, R3, Mini, and Foreman jigs. With markings for 1/2, 3/4, and 1-1/2 inch materials and a thickness gauge that works from 1/2 inch to 1-1/2 inches, it aligns common stock sizes to repeatable drilling depth. Add this Kreg Tool component to keep pocket-hole drilling on those jigs tied to consistent, measurable settings on every run.
Sold In: 1 Each