
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
ABS edgebanding GSX7R anthracite linen is a 1 mm thick ABS edge banding that finishes exposed panel edges with a consistent anthracite linen look, which supports clean, uniform runs across cabinets, casework, and other panel-based projects where a matching edge appearance matters.
The 23mm width provides coverage for common panel thicknesses, giving fabricators enough face to trim flush on both sides while keeping glue lines concealed for a more controlled finished edge profile on straight runs and simple contours.
Salt International branding identifies this as a purpose-made edge banding product from an established edgebanding source, which helps shops align it with other Salt International materials when aiming for visual consistency across multiple components in a project.
The 328 foot roll length described in the product data offers extended linear coverage for production or multi-cabinet jobs, reducing roll changes during edge work and supporting longer, uninterrupted passes through edgebanders or along manual trimmers.
The edge banding product class and the ABS material description confirm that this is a dedicated edgebanding solution rather than a sheet surfacing product, so it is suited to covering raw substrate edges to visually coordinate with surrounding surfaces.
The 1 mm ABS construction gives this Salt International edge banding enough body to track well along panel edges, so once bonded it can be flushed, scraped, or trimmed to blend with the panel face without collapsing or feeling excessively fragile at the corner.
The 23mm width provides working tolerance on either side of standard panel edges, which gives installers room to align the strip, apply adhesive, and then trim away surplus to achieve a straight, square edge along doors, tops, gables, and shelves.
The continuous 328 foot roll format described in the web description favors set-and-run workflows, supporting longer passes through edge equipment or through steady manual application, which helps maintain visual uniformity on multiple parts cut from the same material batch.
The ABS material reference indicates a thermoplastic edge banding type used widely in woodworking, giving shops a familiar material response during trimming and finishing so they can expect predictable behavior when cutting or buffing the finished edge.
This 1 mm ABS edgebanding in anthracite linen from Salt International is suited to finishing exposed panel edges where a darker, linen-style face is desired, such as cabinet sides, shelves, or fronts built from complementary surfaces in similar tones.
The 23mm width bridges the edge of the substrate with enough margin to handle minor panel thickness variations, which helps maintain a clean reveal whether the panels are used vertically in tall cabinets or horizontally on shelves and tops.
The 328 foot roll length makes this GSX7R product practical for shops edging multiple panels in sequence, as they can draw continuous strips cut to part length, which supports aligning the anthracite linen pattern consistently along doors, drawer fronts, and side panels.
The identification as ABS edgebanding in the category and web description positions this strip for use wherever an ABS edge is specified, enabling consistent material selection on jobs that call for ABS edges across cabinetry, casework, or similar built-ins.
The SAP description and manufacturer part number GSX7R.23L give installers a precise reference when matching existing work, which helps when repeating projects or aligning new components with earlier runs that used the same anthracite linen edge.
The 1 mm thickness standardizes the edge profile for this GSX7R edgebanding, so once shops build trimming and scraping settings around this material, they can repeat those settings across multiple parts and orders that use the same edge.
The 23mm width gives a known working band around the panel edge, allowing consistent trimming passes along the face and back, which reduces the need to adjust cutting paths whenever this specific Salt International ABS strip is used.
The 328 foot roll format aligns with batch production or multi-job usage, letting shops draw regular lengths from a single roll, which supports controlled pattern orientation and easier tracking of material consumption job by job.
The anthracite linen description stays constant across the product naming, SAP description, and web description, giving a repeatable visual reference when orders are placed under the same identifier, which supports consistent color and pattern expectations over time.
The clear product class as edge banding pairs the dimensional details with the intended role at the panel edge, so fabricators can treat this GSX7R strip as a repeatable solution whenever an ABS anthracite linen edge is required on similar substrates.
The ABS edgebanding GSX7R anthracite linen is 1 mm thick, giving a defined edge that can be trimmed and finished while maintaining a solid feel on cabinet and panel edges.
The Salt International GSX7R.23L edge banding is 23mm wide, providing coverage and trimming allowance for common panel edge applications in cabinetry and casework.
This 1 mm ABS edgebanding is supplied in a 328 foot roll, supporting longer production runs or multiple projects from a single roll in the shop.
The GSX7R anthracite linen product is ABS edgebanding, giving fabricators a thermoplastic edge material commonly used for cabinetry and panel finishing.
This product is classified as edge banding in the edgebanding and surfacing category, indicating its role specifically for finishing raw panel edges.
The GSX7R anthracite linen 1 mm ABS edgebanding is branded by Salt International, giving shops a consistent source reference for repeat orders.
The ABS edgebanding GSX7R anthracite linen 1 mm thick x 23mm width roll combines a defined thickness, practical width, and 328 foot length in a single Salt International product, giving cabinet and woodworking shops a repeatable ABS edge option for anthracite linen panel projects.
The clear product class and manufacturer part number GSX7R.23L simplify specifying and reordering the same ABS edge when extending existing installations or standardizing edge materials across multiple jobs.
Sold In: 1 Roll
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Sheet | TAGSX7R19MM79 Mfr# GSX7R.19 | Italian Thermo-Structured Veneers Antracite Linen, GSX7R, 2-Sided, 3/4" Thickness, 7' x 9' |