
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
42mm coat hook from Sugatsune America provides a compact hanging point that suits closets, shelves, and other tight spaces where a single hook is more practical than a full rail. Stainless steel construction means the hook body is built from 303/304 stainless steel, so the material resists everyday wear in busy residential or light commercial use. Satin finish on the stainless steel creates a low-glare, professional appearance that blends cleanly with modern decorative hardware and moldings. Projection of 1-11/16 in. sets the hook far enough from the mounting surface to hold coats or bags without crowding the wall. Diameter of 1/2 in. gives a slim, precise profile that works well on cabinet sides or closet partitions. A 22 lb weight rating defines a clear working load, so the hook supports typical garments or small bags within that limit.
Stainless steel construction on the DSH-01 coat hook gives a solid base for mounting into closet or shelf structures that can carry the 22 lb weight rating, so the hook performs within its stated load. Compact 42mm length helps when positioning the hook along narrow closet stiles or shelf fronts, allowing a straight layout even in short runs. The satin stainless finish pairs smoothly with typical cabinet hardware and moldings, so the installed hook visually aligns with hinges, pulls, or shelf standards nearby. Single-hook design concentrates the 22 lb capacity on one hanging point, which simplifies planning loads for coats or bags in entry or wardrobe locations. Diameter of 1/2 in. keeps the mounting area modest, which suits finished wood or panel surfaces where a smaller hardware footprint is preferred.
Sugatsune America DSH-01 coat hook is classified as decorative hardware under decorative hooks, so it suits projects where appearance and function both matter in closets or open shelf runs. The 42mm length keeps each hook compact, which helps when spacing several hooks along a board for coats, hats, or small bags. With a projection of 1-11/16 in., the hook provides enough stand-off to hang thicker garments without compressing them tightly against the surface. The 1/2 in. diameter keeps the hook visually light, so it integrates cleanly with existing decorative hardware and moldings on cabinets or wardrobe interiors. Stainless steel material using 303/304 stainless steel supports consistent performance in daily use, which is important when hooks are mounted in high-touch areas such as entry closets or mudrooms. The satin finish offers a subdued look that coordinates with other satin stainless components in woodworking or cabinet installations.
The DSH-01 coat hook carries a 22 lb weight rating, which defines a clear working capacity for each individual hook when planning hanging loads for garments or small items. Because the hook uses stainless steel construction, the body resists deformation under normal use within that rating, supporting repeatable performance over time. The combination of 42mm length and 1-11/16 in. projection creates a hanging geometry that positions items away from the mounting surface, which helps preserve finished cabinet sides or painted walls by reducing direct abrasion. A single-hook layout with a 1/2 in. diameter concentrates the load on one sturdy point, which simplifies designing straight, evenly spaced hook rows along closet boards. Sugatsune offers a 1-Year Limited Warranty on this coat hook, which provides defined manufacturer backing during initial service life and supports confidence when specifying the DSH-01 for multiple installations.
The DSH-01 coat hook has a 42mm length, a 1/2 in. diameter, and a 1-11/16 in. projection, which sets a compact footprint and a useful stand-off for hanging garments.
The 42mm coat hook is rated for 22 lb, so each hook can support typical coats, hats, or light bags when loads stay within that specified capacity.
The DSH-01 coat hook is constructed from 303/304 stainless steel, which provides a durable metal body suitable for frequent everyday use in closets or shelf spaces.
The 42mm coat hook has a satin finish on its stainless steel surface, which offers a low-glare look that coordinates with other satin decorative hardware components.
The DSH-01 coat hook is described for installation into closet or shelf space, making it suitable for wardrobe interiors, entry closets, and similar storage locations.
The Sugatsune DSH-01 coat hook is backed by a 1-Year Limited Warranty, which provides manufacturer support for this stainless steel hook during the initial period of service.
The Sugatsune America 42mm coat hook combines 303/304 stainless steel construction, a satin finish, and a 22 lb weight rating, so it matches projects that need compact, dependable hanging points in closets or shelf spaces. The 1-11/16 in. projection and 1/2 in. diameter provide a practical balance between clearance and a small footprint, which works well on finished cabinet panels or narrow boards. When a single decorative hook is the right solution for wardrobes, mudrooms, or utility areas, the DSH-01 dimensions and stainless build give a clear, defined option for planning layouts.