Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune DSH-02 is a coat and hat hook from the DSH series, wall-mounted with a staggered upper and lower prong that puts hats and coats on separate arms from one compact mounting point.
On a coat and hat hook, the prong length determines whether a hanging coat actually clears the wall. At 3 inches of projection, this hook gives a folded coat or a jacket on a hanger enough room to hang without bunching against the surface behind it. That clearance is what separates a hook that works in a busy entry from one that looks right but pinches everything hanging from it. The 3-1/2 inch overall length sets the vertical span between the upper and lower prong, which is enough separation to keep a hat and a coat from competing for the same space.
The hook is built from stainless steel and finished in Satin Stainless Steel, which brings a muted, brushed surface rather than a mirror tone. In practice, satin stainless sits comfortably alongside other brushed metals and does not pick up fingerprints the way a polished surface does. The DSH series runs across a range of lengths using the same material and finish language, so a row of these on a hallway wall will read consistently even if the hooks are spaced differently.
The 3-1/2 inch DSH-02 is the right choice where a hook needs real projection without becoming a fixture that dominates the wall. An entryway that handles one or two coats per hook, a mudroom alcove, or a closet interior with enough depth to accommodate the 3-inch reach all suit this size. Designers specifying a row of hooks for a residential entry often land on this mid-range length when the shorter DSH hooks feel too close to the wall and the longer ones push too far into a narrow passage. Shops and contractors outfitting a locker room or a changing area will find it covers most adult coat and jacket needs without overbuilding.
3 inches (76 mm).
Staggered. The upper prong is intended for a hat and the lower for a coat, which is the standard coat and hat hook arrangement.
Yes. The DSH series shares the same Satin Stainless Steel finish and stainless steel construction across lengths, so hooks of different sizes read as a matched set on the wall.
The 3-inch projection gives a typical coat or jacket enough clearance to hang without pressing against the wall, which is what most single-coat applications need.
The DSH-02 delivers the mid-range projection that a working coat hook requires, in a stainless build and a satin surface that holds up to daily use in an entry or closet without demanding attention.