Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune DSH-129 is a staggered two-prong coat and hat hook in Satin Stainless Steel, sized for locations where wall space is limited and a smaller hook fits better than a longer one.
The 40 mm length puts this at the short end of the coat and hat hook range, and that is the point. A narrow entry panel, a coat closet interior, the side of a locker bay, or a tight corridor wall all benefit from a hook that does not reach far into the space. The staggered prong arrangement still delivers two hanging points in a footprint that is only about an inch and a half wide, so a hat and a coat can occupy the same hook without the hook dominating the surface it mounts on.
The hook is stainless steel, and the finish is Satin Stainless Steel, a brushed tone that sits between the brightness of polished stainless and the flatness of a matte surface. Satin stainless reads cleanly in both warm and cool finish environments and does not show fingerprints as readily as a mirror polish. The DSH series carries consistent material and finish across all eight lengths, so a mix of sizes from the same family will read as one intentional specification rather than a collection of near-matches.
Cabinet shops outfitting custom millwork with integrated hook locations often reach for the shortest available hook where the reveal or panel depth limits what will fit without the prong projecting past a door swing or a drawer pull. Designers specifying entry or mudroom hardware in compact floor plans work with the 40 mm length for the same reason. Contractors fitting out commercial spaces, where hooks go in columns, between lockers, or in corridor niches, find that a hook this size tucks into constrained conditions that longer options cannot.
A coat and hat hook has two prongs at different heights, an upper arm for a hat and a lower arm for a coat. A double hook carries two prongs at the same level. This is the staggered form.
The projection is 1-9/16 inches (40 mm).
Yes. The DSH series from Sugatsune runs across multiple lengths in the same Satin Stainless Steel finish and construction, so hooks of different sizes from the family can be specified together.
No manufacturer weight capacity is published for this model. Choose the hook based on its dimensions and the application rather than a load rating.
When the wall is short on room and the hook still needs to serve two purposes, the 40 mm DSH-129 delivers a full coat and hat hook arrangement in the smallest footprint the DSH family offers.