Decorative Hooks Mini Nordic Rubber Series describes a compact decorative hook designed for light hanging where appearance matters as much as function. The 35 mm (1-3/8 inch) projection holds small items off the surface, which helps keep walls visually clean while maintaining easy access to what is hung.
The design reminiscent of young branches adds an organic look, so the hook visually softens utility areas instead of looking purely mechanical. Greyish pink coloring creates a mellow accent, supporting projects that call for a softer palette in residential or light commercial spaces.
The cover material is silicone rubber, which provides a softer contact surface against items. This softer interface helps reduce marking on hanging pieces compared with hard metal alone. A zinc alloy base with nickel plating supports that rubber cover, giving the hook a stable, metal core where it mounts while presenting a finished, metal-to-wall interface.
The projection, height, and width keep the overall footprint compact, so the hook suits tight layouts such as narrow wall panels or modest entry spaces while still reading as a deliberate decorative detail.
This Nordic rubber hook can be used on plaster board, which means it suits typical wallboard installations in many interior rooms. That capability lets installers coordinate decorative hanging points directly on finished walls without resorting to separate backing blocks in many layouts.
The hook mounts easily to plastic board with plaster nails, so on those substrates the installer uses plaster nails as the primary fixing method. For surfaces such as wood, the manufacturer specifies using screws to mount the hook, providing a clear distinction between fastener choices based on the underlying material.
These defined mounting approaches let planners assign the same hook across mixed substrates in a project, selecting plaster nails where wallboard or plastic board is present and screws where wood is the mounting base, while keeping the visible hardware consistent.
This decorative hook from Sugatsune America sits in the Decorative Hooks category, placing it within typical decorative hardware planning for interiors. The mellow greyish pink color works as a soft accent against light-toned plaster board, supporting schemes that mimic natural Northern European spaces.
The design inspired by young branches adds a subtle organic shape, so it sits comfortably alongside natural materials such as wood trims or painted wall panels. When installed on plaster board, the stated suitability means the hook integrates directly into standard gypsum wall layouts without resorting to different visible hardware.
Because height, projection, and width are all compact, this hook suits smaller zones like entry nooks, bed sides, or workstations where large hardware would dominate. The 1-3/8 inch projection provides enough stand-off for hanging items while keeping them close to the wall, which can matter in tight walkways and behind doors.
The zinc alloy base with nickel plating offers a metal visual base at the wall, which pairs well with other nickel or similar-toned hardware in the room, helping the hook function as a coordinated decorative component rather than a one-off detail.
The ability to use this hook on plaster board gives installers confidence when repeating the same part across multiple rooms built with standard wallboard, because the product is identified as suitable for that substrate. Mounting easily to plastic board with plaster nails defines a specific fixing method, simplifying field decisions when working on those boards.
Using screws to mount to surfaces such as wood distinguishes wood installations from board installations, so fastener selection naturally follows the surface type and supports consistent pull resistance appropriate to the substrate. The zinc alloy base provides a dense anchor area around the fastener locations, contributing to a stable feel after mounting.
The silicone rubber cover over that base gives a tactile, slightly forgiving outer layer, so hanging and removing items works against a softer face rather than bare metal. That construction reduces hard-edge contact at the hook, which is useful where the same point will be used repeatedly across the life of the project.
The fixed dimensions - 1-12/16 inch height, 1-3/8 inch projection, and 11/16 inch width - define a repeatable footprint, enabling accurate layout grids and predictable clearance between hooks, adjacent trim, and nearby fixtures.
The hook has a height of 1-12/16 inches, projection of 1-3/8 inches, and width of 11/16 inch, which helps with spacing it near doors, trim, or neighboring hooks.
The hook can be used on plaster board and mounts easily to plastic board with plaster nails, so plaster nails serve as the fixing method on that type of board.
The hook uses screws to mount to surfaces such as wood, so wood installations rely on screw fixings into the timber substrate for stability.
The base material is zinc alloy with a nickel plating finish, while the cover material is silicone rubber, combining a firm metal core with a softer exterior surface.
The greyish pink appearance is part of the Decorative Hooks Mini Nordic Rubber Series design, giving a mellow color accent that reads as a soft visual detail on the wall.
The 35 mm, or 1-3/8 inch, projection sets how far items hang off the surface, keeping them close to the wall while still easy to grab in tight circulation spaces.
The Nordic rubber hook 35mm greyish pink combines a zinc alloy base, nickel plating, and silicone rubber cover in a compact footprint, giving you a decorative point rated for plaster board, plastic board with plaster nails, and wood with screws.
When a project calls for a mellow, branch-inspired hook that repeats cleanly across standard interior surfaces, this Sugatsune America piece provides a defined size, color, and mounting approach that keeps layouts predictable from room to room.