63.1mm rubber hat/coat hook from Sugatsune America provides a compact hanging point for coats, hats, or bags where a small, finished hook is needed. The hook is covered with soft silicone rubber, so contact points against garments or straps are cushioned, which helps reduce marking on fabrics during regular use. Its charming rounded shape creates a smooth profile at the front of the hook, so there are no sharp transitions where items rest, which supports gentle hanging in tight spaces. The cover uses an anti slip feature on the inside, so it significantly reduces the chance the silicone cover will be accidentally removed during daily loading and unloading. A stainless steel base sits under the cover, and that metal core holds items securely in place while the rubber exterior supplies the softer interface. The hook height of 3 inches and 2-1/2 inch projection give enough stand-off from the mounting surface for typical hats and light garments.
This rubber coat and hat hook uses a base made from stainless steel, so the hook mounts as a rigid point on woodwork or similar substrates while the soft rubber cover remains the contact surface. The product is described with a 63mm sizing reference and dimensions of 3 inch height, 2-1/2 inch projection, and 9/16 inch width, which gives installers clear geometry for placing hooks at consistent centers along boards, closet sides, or locker interiors. The manufacturer identifies one size 4 x 32 pan head tapping screw in the description, indicating the hook is designed around a small screw connection, so the base works with light hardware and does not demand a large mounting footprint.
This decorative hook is categorized as a decorative hook in the Decorative Hardware & Moldings|Hooks family, so it fits naturally into finished woodworking such as cabinetry, closets, and furniture-based storage where visible hardware is part of the design. The blue silicone rubber cover provides a vivid but not too bright color tone, which lets the hook act as a subtle color accent on panels, shelving ends, or locker rows without overpowering surrounding finishes. Because the cover is made from silicone rubber and shaped with a charming rounded profile, contact with hats, light coats, or bags is softer than bare metal, which matters in children's rooms, mudrooms, or cabinet interiors where fabrics and surfaces benefit from a forgiving hanging point. The stainless steel base under the cover delivers the structural support for these applications, so even though the user interacts mainly with the rubber surface, the underlying mounting point remains firm. With a height of 3 inches and a projection of 2-1/2 inches, the hook establishes a compact footprint that keeps hardware close to the surface, which is useful when spacing hooks along narrow stiles or locker partitions.
The manufacturer part number PXB-GR05-211-BU identifies this specific 63.1mm rubber hat/coat hook in blue, which helps builders and shops reorder the exact same component for repeat jobs or for extending existing installations. The 63mm reference, combined with the 3 inch height, 2-1/2 inch projection, and 9/16 inch width, gives reliable sizing data so layouts can be planned with accurate clearances between doors, side panels, and adjacent hooks. Because the base is stainless steel, the mounting point resists deformation under normal hanging loads, helping rows of hooks maintain alignment over time. The soft silicone rubber cover, equipped with an anti slip feature to hold it in place, helps the visible part of the hook stay oriented as installed, so color, shape, and contact points remain consistent across a bank of hooks. As a decorative hook from Sugatsune America, it integrates into decorative hardware planning alongside other components, allowing installers to coordinate this blue hook as a defined element in the overall hardware scheme.
The PXB-GR05-211-BU is a 63.1mm rubber hat/coat hook from Sugatsune America, so it is intended for hanging hats, coats, or similar items in decorative hardware applications.
This hat and coat hook has a base made from stainless steel with a cover made from silicone rubber, combining a rigid internal structure with a soft exterior contact surface for hanging items.
The Sugatsune rubber hat/coat hook has a height of 3 inches, a projection of 2-1/2 inches, and a width of 9/16 inch, so it occupies a compact area on the mounting surface.
The hook's silicone cover has an anti slip feature inside, which significantly reduces the chance the cover will be accidentally removed during regular use or cleaning.
The stainless steel base provides a strong mounting core that holds hanging loads securely, while the silicone rubber cover supplies a softer interface against garments and hats.
The description cites a size 4 x 32 pan head tapping screw, indicating the hook is designed around that small screw size for fastening to the chosen surface.
The 63.1mm rubber hat/coat hook in blue from Sugatsune America combines a stainless steel base with a soft silicone rubber cover, giving you a defined hanging point that balances structure with a cushioned surface. Its 3 inch height, 2-1/2 inch projection, and 9/16 inch width suit compact layouts on cabinets, closets, and similar woodworking. For projects that call for a decorative hook with a vivid but not too bright blue tone and a rounded silicone profile, this PXB-GR05-211-BU model provides a clearly defined option.