Sugatsune coat and hat hook combines a 2-5/8 in (67 mm) length hook with a patina brass/tan finish so it hangs garments while adding a defined decorative accent to the mounting surface. The hook is classified as a decorative coat and hat hook, which lets it serve both as functional storage and as visible hardware on walls, panels, or cabinets where appearance matters. Its leather color and texture contrast with the metal base to create a modern appearance, so it fits projects where a designer look is part of the job requirement. The surface retains a luxurious feeling compared to standard plain metal hooks, which helps match higher-end interiors. At the same time, the material is resistant to water damage and dirt, so the visible surface holds up better where hands, coats, or bags regularly contact the hook.
The coat hook height of 1-13/16 in defines how much vertical space the body occupies on the mounting surface, so it helps in laying out hook spacing on panels or wall rails. The 2-5/8 in projection establishes how far the hook extends outward, which matters when setting clearance near doors, cabinet fronts, or adjacent hooks. A width of 1-13/16 in sets the horizontal footprint, which is useful when aligning multiple hooks in a row or keeping within stile or trim dimensions. Together, these fixed dimensions allow more precise layout when designing mounting patterns or coordinating with other decorative hardware around the hook.
This decorative hook belongs to the Decorative Hooks class, so it suits projects where hardware is exposed and expected to contribute to the overall design rather than stay hidden. The patina brass/tan finish gives it a specific color profile that pairs well with warm wood tones or complementary metal finishes, which is useful on millwork, casework, or architectural wall treatments. Because the material offers resistance to water damage and dirt, the hook works in everyday residential or light commercial environments where outerwear, hats, or bags are repeatedly hung and removed. The leather color and texture sitting over a metal base set up a modern visual contrast, so the hook can bridge between traditional woodwork and more contemporary fixtures within the same room.
The matte black finish variant uses a special chromate coating that delivers the glossiness associated with paint while retaining the strength properties of plating, which makes the black surface relevant where a darker accent is needed without giving up a plated metal feel. As part of the Sugatsune America line, the hook aligns with other decorative hardware from the same manufacturer, which can help keep a consistent appearance across multiple hardware points on doors, cabinets, and wall systems. The defined 2-5/8 in (67 mm) length and 2-5/8 in projection give installers reliable reference points when integrating the hook into pre-planned layouts, such as evenly spaced rows along a board or repeated units inside built-in storage.
The combination of a zinc alloy base material and nickel plating finish provides a predictable metal substrate under the decorative surface, which supports consistent drilling and fastening behavior from hook to hook in a run of work. Because the visible layer resists water damage and dirt, the hook surface stays closer to its initial appearance over time, which reduces the need for early replacement purely for cosmetic reasons in busy entry or closet areas. The consistent 1-13/16 in height and 1-13/16 in width dimensions allow precise templating for multiple installs, so layout jigs or CNC-drilled panels can repeat spacing patterns without adjustment between units.
The patina brass/tan color and modern leather-like texture give a predictable design statement wherever it is specified, which helps designers and builders match the hook to other finishes with confidence across a project. The matte black option with special chromate coating delivers a balance of gloss and plating strength, which means the same hook form can be used in both lighter patina brass/tan schemes and darker black schemes while retaining similar handling characteristics. The defined projection and length measurements also assist when coordinating with door swing, adjacent trim, or nearby casework, so hooks can be placed to function effectively without interfering with other installed elements.
The coat and hat hook has a 2-5/8 in (67 mm) length, which gives enough reach to hold coats or hats while keeping them spaced off the mounting surface.
The hook projects 2-5/8 in from the mounting surface, which helps garments hang away from walls or panels to reduce bunching and improve access.
The hook body is 1-13/16 in high and 1-13/16 in wide, which defines its footprint for planning spacing on rails, stiles, or wall locations.
The base material is zinc alloy with a nickel plating finish, providing a solid metal structure beneath the patina brass/tan decorative surface.
The leather-like surface keeps a luxurious feeling while resisting water damage and dirt, so the visible area better maintains appearance in daily hanging use.
The matte black finish uses a special chromate coating that combines paint-like glossiness with plating strength, giving a dark accent that remains a plated metal surface.
This Sugatsune coat and hat hook, part number PXB-LE05-111-TN, provides a defined 2-5/8 in (67 mm) length and 2-5/8 in projection with a patina brass/tan finish, so it fits projects needing measured hanging space and a specific decorative tone. With a zinc alloy base, nickel plating, and a leather-like surface that resists water damage and dirt, it supports visible use in entry, closet, or cabinet applications where both appearance and function are specified. Use these fixed dimensions and finishes to align the hook with surrounding hardware, finishes, and layout plans on your next installation.