Wood coat hook 83mm hornbeam describes a Sugatsune America decorative hook designed for hanging coats and hats on walls or panels. The hook body uses carefully selected natural wood, so it brings a warm hornbeam appearance to entryways, closets, and room walls where visible hardware matters. The metal base supports high loading capacity, so the hook handles heavier garments in everyday use without relying on the wood alone. The curved lines at the base shape the transition from mounting surface to hook arm, which gives the installed hook a finished, mature look against both natural woodwork and painted surfaces. Hand finishing of the wood refines edges and surfaces, so the hook feels smooth when users grab it frequently. Product color and grain vary because it is natural wood, so each installed hook presents a slightly individual appearance across a run of hooks on the same wall.
The hornbeam wall hook length of 3-1/4 in (83 mm) sets a compact profile that projects enough space to hang coats and hats while staying close to the wall in tight corridors. The metal base serves as the structural interface to the mounting surface, so the fastener load transfers through metal instead of the wood body. Size 4 x 35 cross-recessed binding head tapping screws in stainless steel are specified for mounting, so the design pairs the metal base with corrosion-resistant fasteners for typical indoor environments. A lock plug specified for a 4 mm screw, compatible with a 5 mm drill, with 25 mm plug length, works as part of the mounting interface, so drilled holes can be prepared consistently before setting the hook in place.
This Sugatsune coat and hat hook uses hornbeam wood for the visible body, so it suits decorative hardware locations where natural material is preferred over plastic or fully metal hooks. The 3-1/4 in (83 mm) length keeps projection controlled, which helps when lining hooks along hallways, mudrooms, or closet sidewalls. The metal base connects the hook to the wall, so it functions well on solid wood, plywood panels, and other firm substrates that can accept tapping screws. The simple design works in both natural and modern spaces, so it can be laid out on live-edge boards, flat wall panels, or cabinet ends without visually clashing. Because the grain and color vary from piece to piece, the hook introduces subtle variation across a row, which adds character in residential or light commercial interiors.
The base is made from metal for a high loading capacity, so the structural demand of hanging coats stays on the metal component rather than stressing the hornbeam section. Size 4 x 35 cross-recessed binding head tapping screws in stainless steel are specified, so installers can drive the screws efficiently with common cross-recess drivers while benefiting from stainless corrosion resistance in normal indoor humidity. The matte black finish on the metal base uses a special chromate coating that combines paint-like gloss with plating strength, so exposed base areas hold a consistent appearance under repeated handling near entry doors. A lock plug for a 4 mm screw, compatible with a 5 mm drill and 25 mm plug length, provides a defined interface dimension, so drilling operations can be standardized along a run of hooks for clean alignment. Hand finishing of the wood means edges and surfaces are refined at the factory, so installers spend less time addressing surface irregularities before mounting.
The coat and hat hook has a length of 3-1/4 in (83 mm), which sets the projection for hanging garments while keeping the hook compact on the wall.
The base is made from metal for a high loading capacity, so hanging loads transfer through the metal component at the wall interface rather than stressing the hornbeam body.
The hornbeam coat hook uses size 4 x 35 cross-recessed binding head tapping screws in stainless steel, which pair with the metal base for stable mounting on suitable substrates.
The matte black finish is coated with a special chromate that combines paint-like gloss with plating strength, so exposed metal areas maintain appearance under regular handling.
The product is made from natural wood, so final hooks may vary in grain and color, which creates slight visual differences across multiple installed pieces.
The lock plug for a 4 mm screw, compatible with a 5 mm drill and 25 mm plug length, provides a defined interface that supports consistent hole sizing for mounting.
The decorative wood coat hook from Sugatsune America combines a hornbeam body, metal base, and matte black chromate finish, so it integrates strength with a natural appearance. The 3-1/4 in (83 mm) length and defined screw and plug dimensions support repeatable layouts across walls or panels. For projects calling for decorative hooks in natural or modern spaces, this PXB-WC05-111-HM model offers a clearly specified option that balances design, mounting strength, and hand-finished hornbeam texture.