Olympus Pin Tumbler Cam Lock, DCN2 7/8" Material Thickness with 3/4" Cylinder, Flat Black, Keyed Different

Olympus Pin Tumbler Cam Lock For Secure Panels

Olympus pin tumbler cam lock gives installers a cam lock solution built around an N Series keyway, so it can be keyed together with other N Series locks where a common key system is required across multiple lock points.

The DCN2 7/8 inch material thickness specification with a 3/4 inch cylinder sets this lock up for use in applications designed for that thickness range, helping the cam throw engage properly when fitted into the panel or door.

The flat black finish identified as 19 provides a dark, uniform face for projects using black or dark decorative hardware, so the lock face blends visually with contemporary casework and fixtures instead of standing out.

The zinc die cast body and zinc die cast pin tumbler cylinder create a matched housing and core, giving a rigid cam lock assembly suited to furniture and cabinet environments needing consistent mechanical performance over repeated locking cycles.

Because the standard function allows the key to be removable in either the locked or unlocked position, the user can leave doors unlocked without the key hanging in the cylinder, which supports flexible access setups in workspaces or storage areas.

Keyed Cam Lock Details That Support Field Work

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, ties this cam lock into an established key system, which simplifies masterkey planning in commercial and institutional projects.
• The lock can be keyed together with other N Series locks, allowing multiple cabinets or panels to operate on the same key, which reduces key management complexity for facilities and installers setting up larger runs.
• Easily rekeyable operation via a cylinder retainer clip allows cylinder changes without replacing the entire lock case, so service work can focus on rekeying rather than full hardware removal once the lock is in place.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements means this cam lock has been tested to a recognized commercial standard, giving specifiers a defined performance level when selecting hardware for demanding use.
• Woodwork Institute acknowledgment identifies this product for use in WI-guided millwork projects, supporting specification alignment on jobs where Woodwork Institute standards are referenced for architectural casework.
• The 1 inch face that covers splintering eliminates the need for an additional trim ring at the front of the bore, which can streamline boring operations and reduce extra trim parts around the cylinder.

Cam Lock Fit, Face Dimension, And Cam Action

The DCN2 designation for 7/8 inch material thickness sets a clear target for door or drawer front thickness, so boring depth and backset can be laid out to position the 3/4 inch cylinder correctly within the panel.

The 1 inch face dimension is large enough to cover minor splintering around the bore created during drilling, which helps finished casework present a cleaner edge without secondary edge-cleanup operations.

Two reversible cams that work in all positions give flexibility in how the cam throw is oriented relative to the frame or strike, so the same lock body can serve vertical or horizontal doors by changing cam orientation during installation.

The anti-rotation plate and lost-motion cam shifter referenced in the product description support controlled cam travel and housing stability in the panel, keeping the cylinder from rotating in the bore when torque is applied at the key.

Using This Olympus Cam Lock In Real Projects

Where The Olympus Pin Tumbler Cam Lock Fits

The Olympus pin tumbler cam lock with a DCN2 7/8 inch material thickness rating fits casework built around that panel thickness, so shop drawings calling out similar fronts can accept this lock without special door build-ups.

Because the keyway is the N Series, equivalent to National D4291 4-pin or D4292 5-pin systems, the lock fits into keying schemes built on those patterns, which is useful when tying new cabinets into existing key systems.

Zinc die cast construction for both body and cylinder suits interior cabinet and furniture locations where a metal cam mechanism is needed, giving the hardware a consistent feel across a bank of locks mounted in similar casework.

The flat black 19 finish lets the lock coordinate with other flat black cabinet hardware, helping retail fixtures, office furniture, or residential built-ins carry a continuous black hardware theme across hinges, pulls, and locks.

Stock keying as KD/KA in a 4 pin standard format, with stock KA numbers 101, 103, 107, and 915, means the same lock family can support both keyed different and keyed alike schemes within a project, providing flexibility when assigning access zones.

Details That Support Reliable Cam Lock Performance

The pin tumbler cylinder design gives the lock a familiar key feel, which helps users operate it smoothly in daily use, while still integrating into N Series keying layouts for coordinated masterkey work where needed.

Masterkeyed operation as 5 pin standard and grand masterkeyed availability expand the system potential, allowing locksmiths and specifiers to build tiered access levels while still using this same cam lock chassis throughout a facility.

The standard function with key removable in the locked or unlocked position allows staff to lock a cabinet, remove the key, then later leave it unlocked without storing the key in the cylinder, which can match varied security routines.

Two reversible cams designed to work in all positions enable the installer to adjust the cam orientation to pick up different frame conditions or strikes, reducing the need to stock multiple cam lock bodies for simple orientation changes.

The anti-rotation plate works with the cylinder housing to resist rotation in the panel bore under torque, guarding alignment of the keyway so repeated operation does not twist the body and affect cam throw consistency.

The lost-motion cam shifter manages the relationship between key rotation and cam travel, which helps coordinate how far the cam moves relative to key turn and can fine-tune the feel of the lock as it engages or releases.

Common Olympus N Series Cam Lock Questions

Selecting This Cam Lock For Your Next Project

The Olympus pin tumbler cam lock DCN2-US19-KD pairs a 7/8 inch material thickness rating with a 3/4 inch cylinder, so it fits casework designed to that standard while delivering N Series keyway flexibility across your hardware schedule.

With ANSI/BHMA A156.11 Grade 1 performance, zinc die cast body and cylinder, key removable in locked or unlocked positions, and a flat black 19 finish, it supports both functional security and project aesthetics.

For woodworking and fixture builds that call out N Series keying or Woodwork Institute acknowledgment, this Olympus cam lock offers a defined, system-ready cam body you can specify where a keyed cam solution is required.