Olympus Pin Tumbler Cam Lock For Casework Security

Olympus Lock pin tumbler cam lock DCN-Series 1-7/16 cylinder cam lock gives cabinet and fixture builders a keyed cylinder designed for N Series systems, so it drops into projects where that keyway is already standard across installations.

The flat black DCN3-US19-KDMK finish provides a dark, uniform appearance on visible cabinet faces, which helps the lock sit back visually on darker laminates and wood finishes for a cleaner look on completed jobs.

The lock body and cylinder use zinc die cast construction, which creates a solid housing around the pin tumbler mechanism and supports repeatable key operation under everyday commercial or shop use.

This cam lock has a standard function where the key is removable in either the locked or unlocked position, allowing installers and facility staff to remove the key after locking or leave it in place during active use without changing the basic setup.

The 1 inch face is sized to cover splintering around the bore hole, so installers can drill a clean functional hole without adding a separate trim ring to hide minor tear-out on the door or drawer front.

The product has passed ANSI/BHMA A156.11 Grade 1 performance requirements, giving builders a lock that has been tested to a recognized cam lock performance standard for higher service expectations.

Key Cam Lock Details That Support Daily Use

• The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets shops match this lock to existing N Series master key setups for consistent key control across multiple cabinets.
• Stock keying in KD/KA 4 pin standard form gives flexibility to use keyed different or keyed alike groups, so casework runs can be planned around how many locks should share the same operating key.
• Masterkeyed 5 pin standard capability and available grand masterkeyed options allow facilities to organize door access by level, while individual users still operate locks with their assigned change keys.
• The rekeyable design via a cylinder retainer clip means locksmiths or maintenance teams can change keying on-site without changing the entire hardware footprint on the cabinet panel.
• Two reversible cams that work in all positions let installers orient the locking action for vertical or horizontal doors and drawers, using the same core lock body in different layouts.
• The product is acknowledged by the Woodwork Institute, which supports its use in woodworking projects where recognized hardware is preferred for submittals and specifications.

Cam Lock Installation And Fit Considerations

The DCN-Series 1-7/16 inch cylinder length provides a defined reach through typical cabinet door or drawer thicknesses, so fabricators can size their boring depth to that dimension when laying out the lock position.

The 1 inch face design sits flush to the door front and covers splintering, which reduces extra finishing steps around the bore and helps maintain a neat edge on both veneered and painted surfaces.

The two reversible cams are engineered to operate in all positions, giving the installer freedom to position the cam for left- or right-hinged doors or sliding panels while keeping the same core cylinder orientation.

The anti-rotation plate and lost-motion cam shifter are part of the cam system, supporting stable cam alignment at the back of the door so the lock action stays consistent after repeated use.

Using This Flat Black DCN3-US19-KDMK Cam Lock In Projects

Where The DCN-Series Cam Lock Is Typically Used

This Olympus Lock cam lock sits in the Locks and Latches, Cam Locks product class, so it fits naturally into cabinet, fixture, and general woodworking projects that need a cylinder-operated cam to secure doors or drawers.

The N Series keyway structure, equivalent to National D4291 4-pin or D4292 5-pin systems, positions this lock for projects where N Series keys are already part of the key control plan, helping align new casework with existing systems.

The flat black finish on the DCN3-US19-KDMK version suits applications where a dark, low-profile lock face is preferred on furniture, display fixtures, or storage cabinets, matching other dark-finished hardware on the job.

Passage through ANSI/BHMA A156.11 Grade 1 performance requirements supports use in installations where the cam lock will see frequent operation, such as commercial millwork, institutional cabinetry, or shop storage pieces.

The Woodwork Institute acknowledgment identifies this Olympus Lock product as suitable for woodworking projects following WI guidelines, which is useful where specified products are part of submittal documentation.

The zinc die cast body and cylinder provide a rigid mounting point for the cams on the rear side of the door, supporting smooth cam rotation when the key is turned during daily locking and unlocking.

How Design Details Support Reliable Locking Results

The rekeyable cylinder, serviced via a retainer clip, allows keying changes while keeping the same installed lock body, which saves rework on finished cabinet panels when security or key assignments need adjustment.

Stock KD/KA 4 pin standard keying, along with stock keyed alike groups such as 101, 103, 107, and 915, lets shops designate which cabinets share a key, so layout drawings can tie key sets directly to specific locations.

Masterkeyed 5 pin standard construction gives the cylinder room for master pins, enabling master keys to operate multiple change key groups, which simplifies key management for facilities handling many doors or casework zones.

The standard function with key removable in the locked or unlocked position offers flexibility: operators can remove the key after securing a cabinet or leave it nearby while repeatedly opening and closing during active use.

The two reversible cams that work in all positions help installers adapt the cam throw route to the specific strike or frame detail, which supports positive engagement whether the cam needs to swing up, down, or sideways into its catch point.

The lost-motion cam shifter works with the cam setup to manage how the cam picks up movement from the cylinder, which helps deliver consistent locking engagement over time even as components experience normal wear.

The 1 inch face that covers splintering also serves as a stable bearing surface for the cylinder in the bore, which can support alignment of the keyway and help keep the cam rotation predictable after installation.

Common Questions About This Olympus Cam Lock

Selecting This DCN3-US19-KDMK Lock For Your Build

The Olympus Lock pin tumbler cam lock DCN3-US19-KDMK brings N Series keying, ANSI/BHMA Grade 1 performance, and a rekeyable zinc die cast cylinder together for cabinet, fixture, and woodworking projects needing a flat black cam lock solution.

The 1 inch face, 1-7/16 inch DCN-Series cylinder length, reversible cams, and N Series masterkeyed capability all work as a coordinated system, helping builders match appearance, key control, and cam action across their casework line.

For jobs where consistent key platforms, recognized performance standards, and flexible cam orientation matter, this Olympus Lock DCN3-US19-KDMK cam lock offers a focused configuration for securing doors and drawers using the N Series keyway.