Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune Tallman S-Type pull down closet rod creates a pull-down hanging point in a cabinet or closet, so clothes can be stored higher yet reached from a lower working height. This single-type model is designed for installation on a side wall of a cabinet or closet, so it ties directly into the cabinet structure for a stable mounting surface. The left hand configuration positions the operating side on the left, which matters when matching existing layouts or mirrored pairs in a run of closets. An 8-1/4 inch width dimension defines the compact horizontal footprint, so it fits narrow cabinet sections where space is tight. The 29-3/4 inch height dimension sets the vertical reach of the pull-down motion, which matters when planning rod height against floor clearance and overhead obstructions. A load capacity of up to 8 kg, or 17.6 lbs, when evenly distributed supports typical clothing loads without overstressing the mechanism.
This single-type model is designed for installation on a side wall of a cabinet or closet, so layout starts by choosing a suitable vertical panel. The left hand configuration means the functional side is on the left, which helps organize multiple units in a bank of closets without interference. With an 8-1/4 inch width, the unit occupies a modest horizontal span, which is important when balancing hanging space against shelves or drawers in the same cabinet. The 29-3/4 inch height allows the working rod to move through a defined vertical range, which helps position garments at a reachable level while keeping them clear of the cabinet floor. The 8 kg (17.6 lbs) load capacity when evenly distributed guides how much clothing weight the rod is intended to support, which matters for long-term, repeatable operation in everyday use.
This Sugatsune Tallman S-Type pull down closet rod is part of the pull down closet rods class, so it suits cabinet and closet interiors that need higher hanging space brought down to reach. The single-type configuration targets situations with a solid side wall, such as a cabinet end panel or closet side wall, which is useful in reach-in layouts. The left hand layout matches projects that place controls or open access on the left side, which helps align with door swings and user approach. With 8-1/4 inches of width, the unit fits narrower compartments, which allows hanging capacity to be added beside shelving or drawer stacks. The 29-3/4 inch height is sized for typical closet sections, which supports planning consistent rod heights across multiple openings.
The manufacturer part number TAS-800L/U uniquely identifies this single-type Tallman hanger left umber model, which simplifies reordering the same configuration across several closet runs. Being rated for up to 8 kg (17.6 lbs) when evenly distributed gives a defined load capacity, which supports predictable performance when designing hanging sections for everyday garments. The single-type design mounted on a side wall focuses loads into one structural panel, which helps produce uniform alignment from cabinet to cabinet when the same construction is used. The left hand orientation standardizes which side users operate from, which is important when repeating closet sections where consistent ergonomics matter. The 8-1/4 inch width and 29-3/4 inch height dimensions give fixed reference points, which makes it easier to document drilling and layout positions for future projects. As part of the pull down closet rods category, this Tallman S-Type unit serves projects where maximizing vertical space is important, which can streamline closet planning for both residential and commercial interiors.
The TAS-800L/U pull down closet rod is a pull down closet rod designed for installation on a side wall of a cabinet or closet, so it fits built-in storage where vertical space needs to be used efficiently.
The TAS-800L/U is a left hand single-type model, so the operating side is on the left, which influences how it aligns with doors, walls, and adjacent closet sections.
The Sugatsune Tallman S-Type pull down closet rod has a load capacity of up to 8 kg, or 17.6 lbs, when evenly distributed, which defines the intended hanging weight for garments.
The 8-1/4 inch width allows the rod to fit narrower cabinet sections, while the 29-3/4 inch height sets the pull-down travel, which guides vertical and horizontal spacing in a closet plan.
This single-type Tallman hanger is designed for installation on a side wall of a cabinet or closet, so one side panel carries the mounting and helps standardize layout from unit to unit.
The TAS-800L/U part number identifies this specific single-type Tallman hanger left umber model, which simplifies specifying the same pull down closet rod across multiple storage locations.
The Sugatsune Tallman S-Type pull down closet rod TAS-800L/U combines a single-type side wall design, left hand configuration, and defined 8 kg (17.6 lbs) load capacity, so it fits projects needing organized access to higher hanging space. With 8-1/4 inch width and 29-3/4 inch height dimensions, it offers predictable geometry for repeatable cabinet and closet layouts. When a pull down closet rod rated for everyday garment loads and designed for cabinet or closet side wall installation is the right fit, this Tallman S-Type model provides clear, documented parameters for planning and execution.
Sold In: 1 Each