Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WCTM top-mount waste pullout brings a single covered grey bin behind a face-frame cabinet door, riding on full-extension soft-close slides sized for a 12-inch cabinet opening.
A 12-inch cabinet opening is one of the tighter slots in a standard kitchen run, often the cabinet beside the sink or the narrow base that anchors a corner layout. This pullout is built specifically for that space. The single-bin configuration fits where a double-bin unit cannot, and the top-mount positioning puts the bin mouth at counter height so scraps go straight in without lifting a lid or maneuvering around a half-open door. The full-extension slides bring the bin clear of the cabinet face so there is no reaching inside to fish out the liner.
The carriage is finished in maple, a natural-wood look that sits behind the door and blends with maple face-frame cabinetry rather than standing out as utility hardware. The grey bin pairs with that finish without competing with it. Soft-close slides handle the closing motion: the bin decelerates before it reaches home and seats quietly, which matters in kitchens where the trash door takes frequent, one-handed pushes. The 150-pound capacity is the structural ceiling for the carriage and slides together, well above what a single 24-quart bin will carry in normal use.
This unit is the right call when the available cabinet is a face-frame box with a 12-inch clear opening and at least 18 inches of interior height and 22-7/8 inches of depth. It suits kitchen remodels where the designer needs the waste station to disappear behind matching cabinetry, and cabinet shops building face-frame kitchens where a single-bin, soft-close waste pullout is a standard spec. It also works for a homeowner upgrading a narrow base cabinet that currently holds an exposed bin on the floor. The door-mount bracket is included so the bin travels with the door on open and close.
The minimum cabinet opening is 12 inches wide, 18 inches tall, and 22-7/8 inches deep. All three dimensions need to be met for the unit to install and operate correctly.
The 24 quart grey bin ships with the unit. Replacement bins and lids are sold separately.
This model is designed for face-frame cabinet construction. For frameless cabinets, check the 4WCTM series for a frameless-compatible variant.
Yes. The full-extension slides pull the bin completely clear of the cabinet opening so you have access to the entire bin without reaching inside the cabinet.
Choose this pullout when a 12-inch face-frame base cabinet needs a soft-close waste solution that matches the maple cabinetry and keeps a single bin out of sight and fully accessible.
Sold In: 1 Each
