Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
bottom mount waste pullout gives a base cabinet a cleaner way to store and access trash and recycling. This Rev-A-Shelf waste pullout is a bottom-mount unit built with a LEGRABOX waste container frame, a natural maple semi-gloss finish insert, and two 50 quart waste bins in Orion gray. The unit is designed for full access 18 inch base cabinets with 3/4 inch side panels. Full-extension TANDEM slides and BLUMOTION soft-close help the bins move out smoothly and close quietly. For buyers replacing an older base cabinet trash pullout or planning a new install, this double trash pullout combines a wood interior look with a metal frame and covered bin storage for a neat cabinet setup.
Key specs to confirm: This Rev-A-Shelf bottom mount waste pullout is listed at 16-1/2 inches and is designed for full access 18 inch base cabinets with 3/4 inch side panels. The pullout includes two 50 quart bins, so buyers should confirm cabinet opening width, interior depth, interior height, and door clearance before ordering. Because this is a bottom-mount trash pullout with door mounting brackets, confirm that the cabinet floor is suitable for mounting and that the door style works with the pullout path. Load details, compliance information, and any optional TIP-ON or SERVO-DRIVE compatibility requirements should be confirmed with the manufacturer or technical documentation.
What's included: Orion gray LEGRABOX metal frame with maple insert, two Orion gray plastic trash bins with lids, BLUMOTION soft-close full-extension slides, and door mounting brackets.
What to verify before ordering: Confirm your cabinet is a full access 18 inch base cabinet, confirm 3/4 inch side panels, check the usable interior opening and depth, review door attachment needs, and verify whether you plan to use standard operation only or another opening system that requires separate confirmation.
A buyer usually chooses this product when a standard freestanding bin wastes floor space or leaves the cabinet interior disorganized. In a kitchen remodel, a shop-built cabinet package, or a replacement project, a base cabinet trash pullout keeps waste storage inside the cabinet and moves it into reach only when needed. This matters in busy kitchens where users want faster access without leaving containers exposed.
This Rev-A-Shelf waste pullout is built for a specific application rather than broad guesswork. It is designed for full access 18 inch base cabinets with 3/4 inch side panels, which helps narrow fit decisions early. The bottom mount waste pullout format also gives installers a clear mounting approach at the cabinet floor. Because the frame comes fully assembled, buyers who value predictable install prep may prefer it over products that require more frame assembly at the jobsite.
The double trash pullout layout with two 50 quart waste bins works well for homes and projects that separate trash from recycling. The Orion gray bins include lids, which can help contain the contents visually inside the cabinet. The maple waste container pullout design also matters for buyers who want a warmer cabinet interior look instead of an all-metal or plain plastic presentation. The natural maple semi-gloss insert pairs with the Orion gray LEGRABOX frame for a mixed-material appearance that suits many cabinet interiors.
Daily use is also shaped by slide performance. This LEGRABOX waste container uses full-extension TANDEM slides with BLUMOTION soft-close. Full extension helps bring the bins farther out of the cabinet for easier loading and bag changes. Soft-close helps reduce abrupt closing at the end of travel. If your project requires a specific opening method beyond standard pull operation, the product description states it could be used with TIP-ON or SERVO-DRIVE systems, but buyers should confirm exact compatibility details before purchase and installation.
When buyers compare a soft close trash pullout, the practical questions are usually fit, access, included parts, and finish details. Some pullouts focus mainly on bin count, while others add better extension travel, a more finished frame, or door-mount hardware. This Rev-A-Shelf waste pullout stands out in those decision points because the verified package includes the LEGRABOX frame, maple insert, two 50 quart bins with lids, full-extension slides, and door mounting brackets.
Another common comparison point is whether the product is clearly tied to a cabinet type. Here, the application is defined as a full access 18 inch base cabinet with 3/4 inch side panels. That gives installers and purchasing teams a more direct starting point for checking fit. A generic base cabinet trash pullout may require more interpretation if cabinet construction details are not stated as clearly.
Material mix can also affect selection. Buyers who want a cabinet accessory that coordinates with wood interiors may prefer a maple waste container pullout over a plain wire or all-plastic assembly. Buyers who want concealed waste storage with smoother motion may focus on the BLUMOTION soft-close and full-extension travel. The right choice still depends on cabinet opening size, usable interior depth, door setup, and mounting conditions, so those should be verified against the cabinet before the order is placed.
This Rev-A-Shelf waste pullout is designed for full access 18 inch base cabinets with 3/4 inch side panels. Follow manufacturer installation guidance and local building requirements where applicable.
This double trash pullout includes two 50 quart Orion gray plastic bins with lids.
This soft close trash pullout includes BLUMOTION soft-close full-extension slides.
This Rev-A-Shelf waste pullout includes door mounting brackets for attaching the cabinet door to the pullout assembly.
This bottom mount waste pullout requires checking cabinet opening width, usable interior depth, interior height, and confirmation of 3/4 inch side panels. Follow manufacturer installation guidance and local building requirements where applicable.
This LEGRABOX waste container uses an Orion gray metal frame with a natural maple semi-gloss finish insert.
This double trash pullout can support separated waste storage because it includes two individual 50 quart bins.
This Rev-A-Shelf waste pullout is stated as able to be used with TIP-ON or SERVO-DRIVE systems, but exact compatibility should be confirmed before ordering.
This product is a bottom mount waste pullout. Follow manufacturer installation guidance and local building requirements where applicable.
double trash pullout is easiest to buy when the cabinet application is confirmed first. This Rev-A-Shelf unit includes the Orion gray LEGRABOX frame, maple insert, two 50 quart bins with lids, BLUMOTION soft-close full-extension slides, and door mounting brackets. Before purchase, confirm that your cabinet is a full access 18 inch base cabinet with 3/4 inch side panels and verify the interior opening, depth, and door setup. That quick check helps match the pullout to the cabinet and reduces install delays.
Sold In: 1 Each
