Sugatsune draw latch SCC25 identifies this compact latch as a Sugatsune America component designed for secure closure in a small footprint. The latch is classified under latches within locks and latches, so it functions as a mechanical catch to hold doors, panels, or small hatches closed during normal use. The 1-7/16 inch width provides a modest mounting span, which helps it fit on narrow frames or face frames where space is tight. The 1/4 inch length keeps the latch body short, supporting installation in shallow or congested areas. The web description lists a 13.5mm by 6.2mm size, showing a very compact operating section that suits small woodworking or light enclosure projects. Together, these verified dimensions and the latch form give installers a small, positive-closing latch option where larger hardware would interfere with surrounding components.
The Sugatsune Draw Latch SCC25 uses its 1-7/16 inch width to define how it lays out on a stile, rail, or small frame, giving a consistent reference line for installers. The 1/4 inch length means the latch occupies very little front-to-back space, which helps it sit neatly on thin panels or compact doors without projecting far. The 13.5mm by 6.2mm size noted in the web description further indicates a compact operating zone, helpful when planning clearance around an adjacent edge or neighboring latch. Being made from 304 stainless steel, the latch body is suited to typical woodworking and light hardware environments where metal components interact with wood, laminates, or similar materials.
The SCC25 polished stainless latch sits in the latches product class within the broader locks and latches category, so it is intended to hold doors or panels closed in small mechanical or woodworking assemblies. The 1-7/16 inch width helps it pair well with narrow cabinet frames, light doors, or small access panels where a full-size latch would crowd the edge. With a body length of 1/4 inch, it is well suited to areas with tight front-to-back room, such as slender doors or thin lids. The 13.5mm by 6.2mm size points to a compact latch section that can operate in close quarters near hinges, trim, or other hardware. Combined with the polished finish on the stainless material, the latch presents a neat appearance on visible surfaces in cabinetry or small enclosures.
The Sugatsune stainless draw latch uses the SCC25 manufacturer part number, which gives installers a reliable identifier when matching components across multiple builds or service replacements. The defined 1-7/16 inch width and 1/4 inch length allow fabricators to standardize drilling or layout templates, supporting repeatable placements on doors and frames. The compact 13.5mm by 6.2mm size helps keep clearances tight yet functional, which is important when standardizing cabinet lines or enclosure designs with limited real estate. Construction from 304 stainless steel means all these dimensions are built into a stainless body, supporting consistent behavior across similar interior woodworking environments. The polished finish on the stainless material provides a smoother contact surface where the latch meets adjacent parts, which can aid in uniform closing feel from unit to unit.
The Sugatsune Draw Latch SCC25 is a latch in the locks and latches category, so it functions as a mechanical catch to hold a door, panel, or similar component closed.
The Sugatsune SCC25 latch has a 1-7/16 inch width, a 1/4 inch length, and a compact 13.5mm by 6.2mm size area, helping it fit into tight spaces on doors or frames.
The Sugatsune SCC25 draw latch is made from 304 stainless steel, so its body is a stainless component suited to typical woodworking and light hardware environments.
The SCC25 latch has a polished finish on its stainless material, giving a smooth, bright surface that presents a clean, finished look on visible cabinet or panel faces.
The web description lists a 13.5mm by 6.2mm size, indicating a very compact operating area that suits tight layouts around hinges, edges, or nearby hardware on small projects.
The SCC25 manufacturer part number clearly identifies this Sugatsune latch, which helps installers match existing hardware and standardize components across multiple jobs.
The Sugatsune Draw Latch, 1-7/16 inch width by 1/4 inch length, provides a compact stainless option when a small latch is needed on cabinets or panels. With its 304 stainless steel construction, polished finish, and 13.5mm by 6.2mm size, it suits tight layouts that still require a defined closing point. At Wurth Baer Supply, this SCC25 Sugatsune America latch is available for projects that call for a small, clearly specified latch within the locks and latches family.