TLP Latch Body White is a Sugatsune America latch body designed for tall cabinet doors, so it gives larger doors a dedicated locking point instead of relying on improvised catches. The center latch with dead bolt provides a defined lock position, which helps keep the door closed firmly when engaged. Top and bottom cams work with the center dead bolt, spreading the holding points along the door edge so tall doors resist twisting during everyday use. Applicable from 19 mm (3/4") to 30 mm (1-3/16") door thickness, this latch body covers common cabinet door builds, so one part can serve across multiple cabinet lines. The white finish helps the latch blend into light-colored casework, which matters when the latch body is visible on bright interior panels.
Applicability from 19 mm (3/4") to 30 mm (1-3/16") door thickness lets this tall cabinet door latch body span common panel stock, which helps keep boring and edge layout consistent between different door builds. Because it uses a center latch with dead bolt, the hardware can be positioned where the locking action best aligns with the door stile and cabinet frame, which supports straightforward drilling jigs and repeat installation. The top and bottom cams extend the working height of the mechanism, so once the door thickness falls within the 19 mm to 30 mm range, the same layout method can be repeated from cabinet to cabinet.
This Sugatsune cabinet latch body is described as suitable for tall cabinet doors, so it targets installations such as extended-height pantry or wardrobe-style doors where a longer door benefits from multiple control points. The center latch with dead bolt locates around the mid-height area of the door, giving a primary locking point that resists pull at a comfortable reach height. Top and bottom cams extend the control above and below this center position, so the tall door stays aligned along its length when closed. Because it is applicable from 19 mm (3/4") to 30 mm (1-3/16") door thickness, the same TLP Latch Body White can be planned into different cabinet lines that use thicker or thinner doors, keeping the application zones consistent even as panel thickness changes.
When the door will be locked when knob is pushed in, the latch body provides a simple push-to-lock action that translates clearly for everyday users of the cabinet. That push-in motion activates the center latch with dead bolt, so the locking point is engaged without needing a separate motion at the cams. The top and bottom cams then work with the center dead bolt to hold the door along its height, which helps the tall door close into the same position repeatedly, supporting even reveals and consistent alignment in a run of cabinets. By matching door thickness within the 19 mm (3/4") to 30 mm (1-3/16") range, installers can rely on the geometry of the TLP-LB/WHT latch body to behave the same way across multiple openings, reducing layout variation between cabinets.
The TLP Latch Body White is suitable for tall cabinet doors, so it is intended for vertical door applications where extra control and locking along the height of the door are useful.
The TLP Latch Body White uses a center latch with dead bolt, which provides a defined locking point that holds the tall cabinet door closed when engaged, helping resist pull on the door.
On the TLP Latch Body White, the top and bottom cams work with the center dead bolt to control the door along its height, helping tall doors stay aligned and reducing racking when closed.
The TLP Latch Body White is applicable from 19 mm (3/4") to 30 mm (1-3/16") door thickness, so it covers many standard cabinet door panels used in woodworking projects.
On the TLP Latch Body White, the door will be locked when knob is pushed in, which gives a straightforward push-to-lock action for users operating the cabinet door.
The manufacturer part number is TLP-LB/WHT, which identifies this specific Sugatsune America latch body when matching it to project documents or reorder lists.
The TLP Latch Body White from Sugatsune America combines a center latch with dead bolt, top and bottom cams, and suitability for tall cabinet doors, so it fits projects where door control and straightforward locking are important. With applicability from 19 mm (3/4") to 30 mm (1-3/16") door thickness, it can be specified across a range of cabinet door constructions without changing the latch design. For cabinet runs that standardize on Sugatsune America hardware, the TLP-LB/WHT part designation ties this latch body into that system, streamlining selection for repeat work.