
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
glass door cam lock from Sugatsune America provides a deadbolt-style solution for glass doors where keyed security is required, giving installers a defined locking point on a single door application without adding complex hardware changes to the casework layout.
The interchangeable cylinder lock design allows the cylinder to be changed by using change key MD-K1, so when a key is lost the cylinder can be replaced instead of disturbing the overall lock body installation already set in the door.
The lock is specified for a 30 mm (1-5/16") door thickness, which means it is set up for projects where the glass or door build-up matches that dimension for consistent seating of the cylinder and dependable engagement of the cam into the strike area.
A cylinder case diameter of 22 mm (7/8") defines the bore size needed in the door, helping fabricators and installers drill accurately so the lock seats properly and the trim presents cleanly on the finished surface.
The interchangeable cylinder setup makes this glass door cam lock practical wherever keyed control may change over time, because cylinders can be swapped with the MD-K1 change key rather than reworking the entire lock preparation.
This glass door cam lock is a deadbolt-class product in the Locks and Latches - Deadbolt Locks category, so it functions by projecting a cam to secure the door, which suits applications where a positive locked position is preferred on a single glass door.
The 22 mm (7/8") cylinder case diameter determines the round cutout or drilled hole required, which guides shop work on glass or door materials so the lock body centers correctly and the trim aligns with the door face.
With a specified 30 mm (1-5/16") door thickness, the lock is proportioned so the cylinder length and cam reach are appropriate for that build, supporting consistent engagement without overhanging or short-throw issues at the locking edge.
Being usable as a lock for ALF front mount central lock means it fits into that front-mount arrangement, so the installer can coordinate lock positions with the rest of the central locking layout on a project.
The Sugatsune America 2100GLK glass door cam lock is identified specifically as a single door application solution, which suits situations where one glass door leaf must be secured with a keyed cam engaging a fixed strike point.
As a deadbolt lock within the Locks and Latches - Deadbolt Locks class, it uses a cam action to hold the door shut, providing a defined locked position that aligns with common casework and display layouts using glass fronts.
The ability to use this lock as a lock for ALF front mount central lock places it into projects already designed around that front-mounted central system, allowing the same lock body to serve as the local door lock within that arrangement.
The 30 mm (1-5/16") door thickness specification tells designers and fabricators which glass build-ups or framed glass assemblies will align with the lock dimensions, so the cam reaches the mating point properly when the cylinder sits flush.
The 22 mm (7/8") cylinder case diameter also determines tooling choices during fabrication, because the bore must match that measurement to hold the cylinder firmly and keep the keyway positioned correctly for the user.
As a glass door cam lock described as single door application 1-3/4", 12 11/16"L, it belongs with projects calling for a dedicated keyed point on one panel, rather than multi-door linkage, which simplifies layout where each door is handled independently.
This interchangeable cylinder lock design allows the cylinder to be changed by using change key MD-K1, which means re-keying or replacing a compromised cylinder can be done at the cylinder level while preserving the installed lock housing in the door.
The fact that the cylinder can be changed by using change key MD-K1 turns the lock into a serviceable component over the life of the installation, because cylinder replacement becomes a focused task without adjusting the door bore or lock position.
For locations managed under ALF front mount central lock arrangements, using this glass door cam lock as a lock for ALF front mount central lock helps keep hardware types consistent, which can simplify ordering and field identification during upgrades.
The defined cylinder case diameter of 22 mm (7/8") and the 30 mm (1-5/16") door thickness work together so that once the correct bore is drilled, the cylinder body and cam geometry are set up to operate smoothly through the intended door section.
Since this product sits in the Deadbolt Locks product class, installers know they are working with a deadbolt-style cam that extends to secure the glass door, which can be significant when aligning strikes or receiving profiles in cabinetry or frames.
The SAP description "GLASS DOOR CAM LOCK 18.1MM DIA NICKEL" and the brand listing of Sugatsune America identify the lock as a nickel glass door cam lock from a named hardware maker, which helps specifiers call out the exact item and finish in project documents.
The glass door cam lock is described as a single door application, so it is intended to secure one glass door panel using a keyed cam action to hold the door closed.
The interchangeable cylinder lock allows the cylinder to be changed by using change key MD-K1, so the locking core can be swapped while the main lock body remains installed in the door.
The 2100GLK glass door cam lock is specified for a 30 mm (1-5/16") door thickness, aligning the cylinder length and cam reach with that door section for proper locking engagement.
The cylinder case diameter is 22 mm (7/8"), so the door or glass needs a matching cutout to seat the cylinder securely and keep the keyway centered.
This lock can be used as a lock for ALF front mount central lock, allowing it to function within that front-mounted central locking arrangement on suitable projects.
The product is identified as Sugatsune America Glass Door Cam Lock, manufacturer part 2100GLK, with SAP description GLASS DOOR CAM LOCK 18.1MM DIA NICKEL for clear reference.
The Sugatsune America glass door cam lock with 2100GLK part number, 30 mm (1-5/16") door thickness rating, and 22 mm (7/8") cylinder case diameter gives installers defined parameters, so projects needing an interchangeable cylinder lock on a single glass door can be laid out around these verified dimensions.
Sold In: 1 Each