55mm Spacer for 3810S, 6830, 7810, 8810-24 Series Locks

55mm Spacer For 3810S 6830 7810 8810-24 Series Locks

55mm spacer for 3810S 6830 7810 8810-24 series locks is a dedicated spacer designed by Sugatsune America for specific lock families, so it maintains the lock geometry those models are built around. This spacer is identified as part number 6810-SP, which ties it directly to the matching Sugatsune lock components during planning and ordering. The spacer is classified in locks and latches as a lock spacer, so it works as part of the locking assembly rather than as general-purpose trim. Its 55 mm size aligns with the related lock series, helping keep the lock body positioned consistently on doors or panels. As a white spacer, it visually matches white hardware installations, which keeps jobs looking coordinated in visible locations. Because this spacer belongs to the spacers product class, it is intended to fine-tune the installed position of compatible locks in a straightforward, repeatable way.

Lock Spacer Details That Support Clean Installs

• The Sugatsune America branding on this spacer ties it to the same manufacturer as the 3810S, 6830, 7810, and 8810-24 series locks, so the geometry is set up to match those lock families in normal use.
• The manufacturer part number 6810-SP gives a precise identifier that matches catalogs and drawings, reducing selection errors when planning multiple lock points or reordering for later jobs.
• Placement in the locks and latches category with a spacers product class confirms that this part is intended to work within lock installations, supporting consistent standoff where these locks mount.
• The web description notes that it is a spacer for SL6830-xx, tying this part directly to that lock reference so it can be used where that designation appears in layouts.
• The 55 mm spacer reference connects this piece to the physical scale of the 3810S, 6830, 7810, and 8810-24 series locks, supporting layout where lock body size affects clearances.

Mounting And Thickness Details For This Spacer

This Sugatsune America spacer has a stated thickness of 1/16 inch, or 2 mm, so it shifts the lock position by a defined amount when installed between the lock and mounting surface. The 2 mm dimension lets installers predict how much additional standoff they will get when accommodating surface variations or trim. Because this part functions as a lock spacer, it sits in the lock mounting stack, allowing the lock body to align with the door or panel as designed. The white color noted in the description helps the spacer blend into light-colored installations, which matters when the lock edge or spacer area remains visible after assembly. Being tied to named lock series, this spacer supports repeatable setups across multiple doors where the same lock model is specified.

Using This Sugatsune Spacer In Lock Installations

Where This 2 mm Sugatsune Lock Spacer Fits

This lock spacer is defined as a 55mm spacer for 3810S, 6830, 7810, and 8810-24 series locks, so it is intended to sit with those specific lock models during installation. The description also calls it a spacer for SL6830-xx, which connects it to that lock designation when it appears on drawings or schedules. As part of the locks and latches family in the lock spacers class, it functions within the lock assembly rather than as a general building shim, keeping its role focused on these locking points. The 2 mm, or 1/16 inch, thickness allows it to be stacked in the lock mounting area so the lock body stands off the door or cabinet panel as required for that family of locks. Because the spacer is identified as white, it suits white or light-colored surfaces where the spacer edge might be in view around the lock footprint or near a routed pocket.

Why Thickness And Stacking Matter For Repeatable Results

The specified 1/16 inch (2 mm) thickness means installers work with a known offset each time this spacer is used, so the change in lock position is predictable from one opening to the next. The web information notes that multiple spacers can be used, which allows the 2 mm increments to be combined when extra stand-off is needed in a particular build-up or overlay situation. Because each spacer adds the same 2 mm shift, it becomes straightforward to adjust for variations in panel thickness while keeping the lock aligned with strikes or mating parts from job to job. Being clearly tied to the 3810S, 6830, 7810, and 8810-24 series locks, as well as the SL6830-xx reference, this spacer supports consistent setups wherever those models repeat across a project. The white finish helps these stacked spacers sit behind white hardware without drawing attention to the build-up around the lock body.

Common Questions About This Sugatsune Lock Spacer

Selecting This Spacer For Sugatsune Lock Work

The 55mm spacer for 3810S, 6830, 7810, 8810-24 series locks gives a defined 1/16 inch (2 mm) shift for Sugatsune America lock bodies, so planning standoff is straightforward. With part number 6810-SP tied to SL6830-xx and related series, ordering stays consistent across repeated installations. The ability to use multiple spacers in one location lets installers apply simple 2 mm increments where surfaces vary. For projects built around these Sugatsune lock families, this white lock spacer offers a direct way to control lock position while keeping component identification clear throughout the job.