Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1.5mm 2D adjustable steel wing base plate describes a hinge mounting plate that provides overlay and height adjustment for dialing in cabinet door alignment. This base plate is designed for H160 series hinges, so it works as the connection point between the hinge and the cabinet side or frame in that system. The steel construction gives a solid mounting platform, which supports consistent door action across repeated openings. Overlay and height adjustable (plus or minus 1.5 mm) means the plate lets you shift the door slightly in two directions, helping you correct small layout variances on site. Standard height: 0 mm indicates the reference height of the plate, which helps when matching it to door and cabinet drilling patterns in a run of cabinets.
This screw-on wing base plate is made for H160 series hinges, so its geometry matches that hinge system and supports proper articulation of the door. Because the plate is overlay and height adjustable (plus or minus 1.5 mm), it offers functional 2D adjustment at the mounting point, which helps correct minor drilling offsets without reworking holes. Standard height: 0 mm defines the reference level from the cabinet surface, which helps when repeating a known drilling pattern across a bank of doors. Recommended screws: 3.5 mm tapping screw or wood screw (do not use countersunk head screws) specify a flat or pan style bearing surface, which lets the plate clamp evenly to the cabinet without pulling into a countersunk cavity.
This hinge mounting plate is in the Hinge Mounting Plates class and is intended for use with H160 series hinges, so it serves as the mounting interface for those hinges on cabinet cases. As a steel wing base plate, it spreads load over a wider area of the cabinet surface, which is helpful on standard cabinet side panels where you want solid screw purchase. Standard height: 0 mm works as the base reference in a hinge stack, which aids when setting consistent door overlay across multiple cabinets. The satin chrome finish matches the SAP description of chrome, so the visible plate areas coordinate with chrome-toned hinge arms in installations where hardware is seen.
Overlay and height adjustable (plus or minus 1.5 mm) means the plate provides 2D door adjustment directly at the mounting point, which reduces the need to redrill when a door sits slightly high, low, or off the intended overlay. The screw-on design uses mechanical fastening with recommended screws: 3.5 mm tapping screw or wood screw (do not use countersunk head screws), so the plate grips the cabinet material with a proper head bearing surface, supporting repeatable torque and long-term seating. Being a Sugatsune America component with manufacturer part 100-04A-W-32 helps identify it precisely in a hinge schedule, which is important when matching replacement plates or ordering consistently for a project. The hinge plate being overlay and height adjustable also gives flexibility during final fit-out, which is valuable when walls or cabinet faces are not perfectly true.
This hinge mounting plate is designed for H160 series hinges, so it matches that hinge system for proper door movement and alignment.
The hinge base plate is overlay and height adjustable plus or minus 1.5 mm, which lets you fine-tune door position for even gaps and consistent overlay.
The hinge mounting plate has a standard height of 0 mm, giving a clear datum when laying out hinge drilling and setting door overlay across cabinets.
The base plate uses recommended screws of 3.5 mm tapping screw or wood screw, and the note do not use countersunk head screws supports proper clamping.
The base plate is a steel wing base plate with a satin chrome finish, which matches the chrome description and suits visible cabinet hardware applications.
The hinge mounting plate uses manufacturer part 100-04A-W-32, which helps tie it directly to Sugatsune America specifications and ordering systems.
This 1.5mm 2D adjustable steel wing base plate for H160 series hinges combines a screw-on design with overlay and height adjustable (plus or minus 1.5 mm) functionality, so it suits cabinet work that needs precise door alignment. Standard height: 0 mm and the defined recommended screws: 3.5 mm tapping screw or wood screw (do not use countersunk head screws) give clear mounting parameters, which supports consistent installation decisions on site. For projects using H160 series hinges where a satin chrome steel wing base plate matches the hardware schedule, this mounting plate provides the defined geometry and adjustment range needed for controlled cabinet door fit.