Series 200 lift-off hinges are left hand satin nickel hinges designed as specialty lift-off hinges for doors that open toward the left side. This product is identified as Series 200 Lift-Off Hinges 2" Left Hand Satin Nickel, so it provides a clear match when a left-hand hinge is required for a project. The SAP description "200 SERIES LIFT-OFF HINGE 1' H LH NICKEL" confirms it belongs to the 200 Series family in a lift-off configuration, so the hinge is built for applications where doors need to be removable without taking fasteners out. The product class is defined as a Lift-Off Hinge, which means the hinge style supports lifting the door off the frame when it is in the open position, useful when repeated access or removal is part of the workflow. The satin nickel designation describes its nickel finish, which gives the hardware a neutral, trade-friendly appearance that coordinates with other nickel-finished components.
The web description defines how this lift-off hinge is oriented in use: "Left hand hinge: If door is pulled open towards your left side" and "Right hand hinge: If door is pulled open towards your right side." This clarification ties hand designation directly to the direction of door pull, which matters when planning layouts where multiple doors share a common frame. With this product identified as left hand, it is intended for installations where the user pulls the door open toward the left, aligning hinge hand with the stated description and supporting consistent swing across similar openings. The explicit left-hand wording in both the product name and description helps reduce selection errors when ordering pairs of left and right hinges for matching assemblies.
The product is described as Series 200 Lift-Off Hinges 2" Left Hand Satin Nickel and categorized under Hinges|Specialty Hinges, so it is suited to applications that benefit from a small-format, removable-door hinge rather than a standard fixed-pin hinge. As a Lift-Off Hinge by product class, it is structured so the door leaf can disengage from the frame leaf by lifting, which serves cabinet, panel, or specialty door projects where doors need to be taken off for access, finishing, or service. Because the web description associates left-hand hinges with doors pulled open toward the left side, this hinge fits locations where that exact motion is required, such as paired doors where one swings left and the other swings right. The satin nickel finish described in the name also suits projects where visible hardware needs a neutral nickel tone to align with surrounding pulls, knobs, and other nickel components.
The SAP description "200 SERIES LIFT-OFF HINGE 1' H LH NICKEL" and manufacturer part number 201L/SN tie this hinge to Sugatsune Americas 200 Series, giving installers a repeatable reference when they want the same hinge geometry and lift-off behavior across multiple jobs. As a specialty Lift-Off Hinge, it enables door removal by lifting the door leaf from the frame leaf, which can streamline finishing, edge work, or hardware changes because the hinge leaves remain aligned on the cabinet or frame. The clear left hand designation in both the name and description connects the hinge to a specific door pull direction, helping installers align door swing with drawings or shop notes without interpreting generic hand terms. The satin nickel designation further defines the visible surface, allowing designers and fabricators to coordinate this hinge with other satin nickel components to keep a coherent hardware appearance across the installation.
The Sugatsune 201L/SN is a Series 200 Lift-Off Hinge, so it is designed so the door can be lifted off the frame leaf, useful when doors need to be removed without unfastening the hinge leaves.
The web description states a left hand hinge is used when the door is pulled open toward your left side, so this hinge is intended for that left-pull door orientation.
The product name specifies Satin Nickel and the SAP description notes nickel, so this hinge has a nickel finish suited for satin nickel hardware schemes.
The product name describes the hinge as 2" Left Hand Satin Nickel, indicating a 2 inch hinge size that suits smaller doors or panels where compact hardware is preferred.
The Lift-Off Hinge product class means the door leaf separates by lifting, which lets installers remove doors for finishing or service while the frame leaf alignment stays fixed.
The brand is Sugatsune America, so the hinge comes from Sugatsune's product line, aiding projects that standardize on Sugatsune hardware.
The Series 200 Lift-Off Hinges 2" Left Hand Satin Nickel from Sugatsune America combine a 2 inch lift-off hinge format, left hand orientation, and satin nickel finish for specialty hinge applications. With a clearly identified Lift-Off Hinge product class, a defined left-pull door description, and manufacturer part number 201L/SN tied to the 200 Series, this hinge gives installers a precise option when they need removable doors that open toward the left side. For projects that call for a specialty hinge in satin nickel within the Hinges|Specialty Hinges category, this Series 200 lift-off hinge provides a clearly defined choice.
Sold In: 1 Each