
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune inset pivot hinge gives wood doors a semi-concealed pivot point, so the door swings from a compact, low-visibility hinge instead of an exposed butt hinge. This PH-01 model from Sugatsune America is designed as a pivot hinge for wood doors in cabinetry and similar woodworking projects where a clean look is important. The hinge is classified as a semi-concealed hinge, so most of the hardware is kept out of sight when the door is closed, which helps finished work look more refined on the job. The hinge uses a screw-on mounting style, so it fastens directly to wood with standard tools. A matte silver finish coordinates with many modern hardware finishes, so hinges blend with common pulls and knobs without drawing attention. The PH-01 part number identifies this specific vertically and laterally adjustable inset pivot hinge in the Sugatsune line.
The PH-01 uses a screw-on mounting method, so installation relies on driving wood screws through the hinge body into the wood door and the mating surface. This approach lets installers position the hinge precisely where needed during layout. Because the hinge is vertically and laterally adjustable after installed, final alignment work shifts from repeated re-drilling to controlled adjustment, which can streamline door fitting on runs with multiple openings. The matte silver finish on the hinge provides a neutral metallic look, so it visually matches many common hardware lines during final trim-out. As a semi-concealed hinge for wood doors, the PH-01 keeps most of the hardware out of direct sightlines when the door is closed, which supports design goals calling for understated hardware.
The Sugatsune inset pivot hinge PH-01 is described as a pivot hinge for wood doors, so it suits projects built from wood door panels in cabinet or specialty woodworking work. Because it is a semi-concealed hinge, it supports layouts where the client wants hardware presence minimized while still needing a defined pivot point instead of a traditional butt hinge. The hinge is part of a specialty hinges category, so it targets applications where a standard hinge layout is not desired, such as unique door motions or clean-lined openings. The matte silver finish spreads across the exposed portions of the hinge, so visible hardware components tie into other silver-toned fittings in the same room or installation. As a Sugatsune America product, the PH-01 connects into a broader hardware family often used in professional shop environments.
The PH-01 pivot hinge is vertically adjustable after installed, so installers can shift the door up or down on the pivot without pulling the hinge off the work, which helps correct minor drilling offsets and uneven gaps. The hinge is also laterally adjustable after installed, so the door can move side-to-side along the opening, which supports dialing in an even reveal between adjacent doors or between door and case. This combination of vertical and lateral adjustment lets fit-up occur at the hinge rather than through slotting holes in the field, which can save time on multi-door installations. The screw-on mounting style means wood screws fasten the hinge body to both the wood door and the mating surface, so standard drills and drivers handle the work steps. The hinge is identified as non-handed, so the same hinge design works on either side orientation, which simplifies stocking and layout when alternating left and right doors in a run. A separate body and bracket are described for the PH-01, so the hinge components install in stages, which can assist with setting bracket positions first and then hanging the door by connecting the body.
The Sugatsune PH-01 is described as a pivot hinge for wood doors, so it is intended for wood door constructions in cabinet and woodworking projects that use wood panels.
The PH-01 hinge is vertically adjustable after installed, so door height can be shifted on the opening, which helps align reveals and reduce contact at top or bottom edges.
The PH-01 is laterally adjustable after installed, so the door can move side-to-side, which helps fine-tune gaps and alignment with neighboring doors or cabinet sides.
The PH-01 uses a screw-on mounting style, so wood screws fasten the hinge body to the wood door and its mating surface, fitting typical drilling and driving workflows.
The PH-01 is described as non-handed, so the same hinge design can be used on doors hung on either side, which simplifies planning and inventory.
The PH-01 is classified as a semi-concealed hinge, so only part of the hardware remains visible when the door is closed, supporting a cleaner finished appearance.
The Sugatsune inset pivot hinge PH-01 delivers a pivot hinge for wood doors with vertical and lateral adjustment, so door alignment can be tuned on the job. Its semi-concealed design keeps most hardware out of sight, while the matte silver finish coordinates with many common decorative fittings. A non-handed layout lets one hinge style serve both left and right door orientations in a run. For projects calling for a specialty pivot hinge approach on wood doors, the PH-01 offers a defined product identity centered on screw-on mounting and post-installation adjustment for practical, efficient fitting.