Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf cookware organizer gives base cabinet storage a more organized pull-out layout for pots, pans, and lids. This cabinet cookware organizer is built from natural maple with dovetail construction and a semi-gloss finish. The Rev-A-Shelf product uses Blum MOVENTO slides for soft-close action and full-extension pull-out access with 3/4 inch over-travel. It is designed for 18 inch and 24 inch base cabinets and mounts to the cabinet floor. Up to 220 pre-drilled peg holes let you set peg positions for different cookware sizes, while the top shelf is made to hold lids with a lid organizer arrangement based on cabinet width. For installers and serious DIY buyers, the key value is clearer access and adjustable storage inside a standard base cabinet opening.
Key specs to confirm: This maple cookware organizer is designed for 18 inch and 24 inch base cabinets, but buyers should confirm the exact cabinet opening, interior clearance, and floor-mounting area before ordering. The organizer is 14-1/2 inches wide by product description, and it uses full-extension undermount slides with 3/4 inch over-travel and Blum MOVENTO soft-close. The slides are verified as 110 lb. rated, but if your cookware load, cabinet construction, or use conditions are unusual, confirm all load and installation details in current manufacturer documentation. Check that your cabinet layout allows the top shelf lid organizer arrangement and enough clearance for pull-out travel.
What's included: Verified included items are the two-shelf organizer and four matching press-in pegs. The top shelf is configured to hold lids, with one lid organizer arrangement for 18 inch cabinets or two for 24 inch cabinets as stated in the product description.
What to verify before ordering: Confirm your base cabinet width, interior opening, cabinet floor condition, door and face frame clearance, and whether your cookware sizes match the peg layout you plan to use. Follow manufacturer installation guidance and local building requirements where applicable.
A base cabinet pull-out organizer like this is useful when cookware gets stacked deep in a lower cabinet and access becomes awkward. Pots, pans, and lids often end up nested behind each other, which makes it harder to grab the right piece without unloading the whole cabinet. The Rev-A-Shelf cookware organizer addresses that common problem with a two-shelf pull-out format that brings stored items toward the cabinet opening.
The lower area can be arranged with the provided press-in pegs using up to 220 pre-drilled peg holes. That matters when cookware sizes change from one kitchen to another. A buyer outfitting a remodel, replacing a worn organizer, or adding order to a busy prep area can set the peg positions around actual pans instead of forcing cookware into a fixed rack pattern. The top shelf is intended to hold lids, which helps separate flatter pieces from heavier pots below. For an 18 inch base cabinet organizer, the product description states one lid organizer arrangement. For a 24 inch cabinet application, the description states two.
The full-extension pull-out travel with 3/4 inch over-travel is also important in day-to-day use. It helps move cookware farther out of the cabinet so items near the rear are easier to see and reach. Because the unit uses Blum MOVENTO slides with soft-close action, the organizer returns smoothly into the cabinet. For installers, the undermount slide format keeps the hardware below the shelves for a cleaner interior view. For buyers comparing a dovetail maple organizer with wire or fixed shelf storage, this type of pull-out can make access more direct while keeping cookware grouped in one cabinet zone.
If your cabinet has unusual obstructions, deep face frame offsets, or limited door opening clearance, those conditions should be confirmed before purchase. The product is verified as floor-mounted, so cabinet floor space and mounting conditions are part of the fit check.
When buyers compare a soft-close cookware organizer, the useful differences are usually material, slide type, adjustability, and cabinet fit. This Rev-A-Shelf unit gives verified details in each of those areas. The organizer is made from natural maple with dovetail construction and a semi-gloss finish. That combination matters for buyers who want a wood organizer that matches other cabinet accessories and presents a finished appearance inside the box.
Slide hardware is another major comparison point. This product uses Blum MOVENTO undermount slides with soft-close and full-extension movement plus 3/4 inch over-travel. In practical terms, that means the organizer is built for smooth travel and improved access to cookware stored farther back. The slide rating is verified at 110 lb., but buyers should still confirm the complete installed application, especially if cookware is unusually heavy or if the cabinet structure needs reinforcement.
Adjustability also separates one cabinet cookware organizer from another. Up to 220 pre-drilled peg holes allow a more flexible layout than a fixed compartment design. That can help if your cookware mix includes larger saute pans, stock pots, or lids with different handle shapes. Instead of assuming every kitchen stores the same pieces, the organizer gives a configurable peg pattern.
Finally, fit should guide the decision more than appearance alone. This organizer is designed for 18 inch and 24 inch base cabinets, and the top shelf lid setup differs by cabinet size. Buyers should confirm opening width, interior depth, door swing, and floor-mounting space before ordering. Those checks help avoid the common mistake of choosing a pull-out that looks right on paper but does not match the actual cabinet interior.
This Rev-A-Shelf cookware organizer is designed for 18 inch and 24 inch base cabinets. Confirm your actual cabinet opening and interior clearance before ordering.
This maple cookware organizer is described as 14-1/2 inches wide. Verify your cabinet interior width and any face frame restrictions before installation.
This cabinet cookware organizer uses Blum MOVENTO soft-close undermount slides with full-extension travel and 3/4 inch over-travel.
This base cabinet pull-out organizer mounts to the cabinet floor. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf cookware organizer has up to 220 pre-drilled peg holes and includes four matching press-in pegs for layout changes.
This cookware organizer has a top shelf that holds lids, with one lid organizer arrangement for 18 inch cabinets or two for 24 inch cabinets.
This pull-out organizer uses slides verified as 110 lb. rated. Confirm your full installed load and cabinet condition before purchase.
This dovetail maple organizer is made from natural maple and has dovetail construction with a semi-gloss finish.
This 18 inch base cabinet organizer purchase should be based on cabinet opening width, interior clearance, floor-mounting space, and door or face frame clearance.
Maple cookware organizer buyers should focus on cabinet fit, mounting method, and the storage layout they need for pots, pans, and lids. This Rev-A-Shelf unit is a two-shelf floor-mounted pull-out with natural maple dovetail construction, Blum MOVENTO soft-close slides, and four matching press-in pegs. Before purchase, confirm that your base cabinet matches the intended 18 inch or 24 inch application, that the 14-1/2 inch width works within the opening, and that your cabinet interior allows full pull-out travel and lid storage on the top shelf.
Sold In: 1 Each
