Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Tafisa 203/050 black melamine is a melamine board designed for woodworking projects that call for a uniform black surface on both faces. The board uses an MDF core, which provides a flat, consistent substrate for machining and edge treatment. Top and bottom impregnated decorative layers are pressed and thermo-fused to the MDF, creating a hard melamine surface that bonds directly to the core for dependable panel integrity in cabinet and fixture work. The board is double sided with the color 203/050 black, so both faces present the same appearance, which supports projects where both sides of the panel remain visible. A glue back texture on the surface supports adhesive bonding applications that rely on consistent texture across the panel. The panel has a 3/4 inch thickness and a 49 x 97 size, giving a familiar format for layout, cutting, and yield planning on shop equipment.
This melamine board has a 3/4 inch thickness, so its profile aligns with designs based on three-quarter-inch panels in casework and furniture. The MDF core supports clean edges when sizing panels, which assists with edging and joinery fit. A 49 x 97 panel size gives a slightly oversize sheet relative to nominal 4 x 8 planning, which can support trim-to-size operations and part nesting on shop equipment. With double sided 203/050 black color, edges and reveals that expose both faces present a consistent appearance during installation. The glue back texture on the surface offers a repeatable face character for glue-dependent assemblies that bring this panel into larger structures or fixtures.
This Tafisa 203/050 black melamine board belongs to the melamine category of board panel products, so it fits applications where a finished decorative surface and structural panel act as a single component. The MDF core provides a stable base for cabinet boxes, case goods, or fixtures that rely on flatness across large spans. Double sided 203/050 black faces suit partitions, doors, and panels where both sides remain visible after installation, such as open shelving runs or room-dividing casework. Because the decorative layers are thermo-fused to the MDF, the surface acts as an integral part of the panel during machining, which is useful when routing or boring components directly from the sheet. The 49 x 97 size supports cutting a range of parts from a single panel, aligning with layouts that favor efficient sheet utilization in commercial woodworking shops.
The thermo-fused construction of this Tafisa melamine board means the top and bottom decorative layers are pressed directly onto the MDF core, which supports consistent surface adhesion while machining and handling finished parts. The MDF core itself gives uniform density across the panel, which helps tools track predictably when cutting joinery or creating hardware openings. Double sided color 203/050 black means orientation during layout is simplified, because either face can be used outward without affecting finished appearance. The glue back texture offers a specific surface character that can support adhesive bonding where this panel interfaces with other substrates. The 3/4 inch thickness allows designers and installers to coordinate this sheet with other three-quarter-inch components, helping edge alignment and flush surfaces across assemblies. With a 49 x 97 format, the board provides enough area for nesting parts while still fitting typical panel processing equipment.
This Tafisa melamine board has an MDF core, which offers a flat, consistent substrate that supports clean machining and predictable joinery in cabinet and furniture projects.
The board has a 3/4 inch thickness, aligning it with common three-quarter-inch casework standards for cabinet boxes, shelves, and structural panels.
The panel measures 49 x 97, giving an oversize sheet relative to typical 4 x 8 planning and supporting efficient part nesting on panel saws and CNC equipment.
This Tafisa melamine board is double sided with the color 203/050 black, so both faces match visually for panels where each side remains visible.
The top and bottom impregnated decorative layers are pressed and thermo-fused to the MDF, creating an integrated surface that stays bonded during fabrication and use.
This Tafisa board has a glue back texture, providing a consistent surface character intended for adhesive bonding applications within panel assemblies.
This Tafisa 203/050 black melamine board pairs an MDF core with thermo-fused decorative layers on both faces, giving you a double sided 203/050 black surface in a 3/4 inch, 49 x 97 format. The glue back texture and consistent MDF core support machining, adhesive bonding, and layout across cabinet, fixture, and casework projects that rely on uniform black faces. For woodworkers and installers who work with melamine board panel products, these verified details define how this sheet fits into shop workflows and finished installations.
Sold In: 1 Sheet