
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Vauth-Sagel VS ENVI Space triple-bin waste pullout brings three 31-quart grey bins out of a 21-inch face-frame base cabinet on a full-extension, soft-close top-mount system, so the whole capacity is reachable in one pull.
A single-stream trash setup works until a household or kitchen operation starts sorting. This pullout handles three streams at once, trash, recycling, and compost or a second recycling category, all behind one cabinet door. Because the system is full-extension, the rear bin is as easy to reach as the front one. There is no leaning or blind tossing into the back of the cabinet.
The top-mount design keeps the slide hardware above the bin tops, which means the full depth of each 31-quart bin is available for waste rather than occupied by hardware running along the side or bottom.
The three bins are grey, a neutral that reads cleanly against most cabinet interiors without drawing attention. The ENVI Space series construction pairs the top-mount frame with soft-close slides rated for the combined load of three filled bins. The soft-close mechanism controls the return stroke on a carriage carrying that much weight, so the unit does not swing back hard against the cabinet interior. The door-mount bracket connects the door panel to the carriage so both move together; if the door is not yet drilled for the bracket, that connection is the one installation step that adds time to a standard fit.
This unit is specified for face-frame cabinetry with a 21-inch minimum opening width, at least 20-1/2 inches of minimum opening height, and at least 20-5/16 inches of usable depth. Those three dimensions need to clear before ordering. It suits a primary kitchen where sorting is already part of the household routine, a renovation where the designer is building a waste-management center into a run of base cabinets, or a cabinet shop building high-specification kitchens that spec Vauth-Sagel hardware throughout. It is a face-frame-only unit, so frameless installations require a different carriage.
The cabinet needs a minimum opening width of 21 inches, a minimum opening height of 20-1/2 inches, and a minimum opening depth of 20-5/16 inches. All three need to be met for the unit to fit and function correctly.
No. This carriage is designed for face-frame cabinets. If the installation is frameless, a different ENVI Space configuration is required.
The product name and attributes identify this SKU as including three grey bins. Confirm whether lids are part of this configuration from the product listing before ordering, as lid inclusion can vary across ENVI Space configurations.
The unit is door-mount compatible. Confirm bracket inclusion from the product listing, as hardware may be sold separately depending on the configuration.
For a face-frame kitchen that needs three-stream waste sorting behind one door, this pullout puts the full capacity forward on soft-close, full-extension slides sized for the work.
Sold In: 1 Kit