
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
low pressure disinfectant sprayer C.A. Technologies BC100H-08-1090 is a dedicated sprayer designed for applying water-based disinfectants at controlled pressure, which supports consistent coverage on surfaces where even application is important. The medium speed application description indicates this sprayer moves material steadily rather than aggressively, which helps installers and maintenance crews work at a manageable pace on detail-sensitive areas. A 2 HP power rating drives the unit, giving the sprayer enough capability to maintain output while still being sized for facility and jobsite use. The low pressure disinfectant sprayer description aligns with a max 120 psi rating and 80 psi pressure pot, which keeps atomization controlled for disinfectant work rather than high-build coatings. This sprayer is classified under spray equipment and disinfectant sprayers, so it is oriented toward applying disinfectant materials rather than general paint work.
The C.A. Technologies BC100H-08-1090 uses 120 V single phase power at 14 AMP, which allows the sprayer to run on standard 110V-120V electrical service common in commercial and shop environments. A 2 HP motor rating ties into this electrical requirement, supporting the compressor performance that feeds disinfectant spraying. Air delivery of 5.3 to 7.0 SCFM depending on pressure describes how much compressed air the unit provides, which directly affects spray pattern stability and material break-up at the gun. The two 2 gallon air receivers, totaling 4 gallons, store compressed air, which buffers pressure swings as the sprayer cycles at different pressures. Together, these electrical and air specifications define how the sprayer operates in a work area and what kind of circuit and air capacity it brings to disinfectant tasks.
The C.A. Technologies disinfectant sprayer BC100H-08-1090 is categorized as a low pressure disinfectant sprayer, positioning it for spraying water-based disinfectants onto surfaces rather than high-build coatings. The medium speed application behavior means material is delivered at a pace suited to walking and sweeping motions in corridors, rooms, or shop areas. With a 2.5 gallon reservoir, the sprayer can hold a meaningful volume of disinfectant, which supports treating multiple rooms or large surfaces in one fill. The 25 feet of hoses extends reach away from the 156 lb base unit, so operators can move through spaces while the sprayer remains staged at a central location. Two 2 gallon air receivers totaling 4 gallons support this on-site workflow by smoothing air delivery while the sprayer output shifts across different pressures and spray demands.
The max 120 psi rating with an 80 psi pressure pot frames the sprayer as a controlled-pressure system, which suits disinfectant atomization where fine, even coverage is important. Air delivery of 5.3 to 7.0 SCFM depending on pressure shows that air output changes as pressures change, which affects how the spray gun breaks up water-based disinfectants into a usable pattern. A 2 HP motor and 120 V single phase (14 AMP) electrical requirement combine to provide this air performance on commonly available power, which simplifies locating the sprayer in typical building circuits. The 156 lb unit weight and integrated air receivers indicate a self-contained system focused on stable operation, which matters when repeatable spray quality is needed across multiple jobs or daily disinfecting routines. The explicit note that it can be used with water-based disinfectants only defines its material role, which guides selection toward compatible disinfectant products for this sprayer.
The C.A. Technologies BC100H-08-1090 sprayer can be used with water-based disinfectants only, which directs its use specifically toward those disinfectant products in cleaning and sanitation workflows.
The 2.5 gallon reservoir on the BC100H-08-1090 holds a significant volume of water-based disinfectant, which supports longer spraying sessions before stopping to refill material.
The BC100H-08-1090 disinfectant sprayer operates on 120 V single phase power at 14 AMP, which aligns with typical 110V-120V circuits in commercial and shop environments.
The BC100H-08-1090 provides 25 feet of hoses, which allows operators to move around rooms or equipment while the main sprayer unit stays positioned in one spot.
The 2 HP rating on the BC100H-08-1090 powers its compressor and air system, which supports the 5.3 to 7.0 SCFM air delivery needed for consistent disinfectant spraying.
The two 2 gallon air receivers, totaling 4 gallons, on the BC100H-08-1090 store compressed air, which helps stabilize pressure and supports more even spray output across the job.
The LOW PRESSURE DISINFECTANT SPRAYER BC100H-08-1090 from C.A. Technologies combines a 2 HP motor, 2.5 gallon reservoir, and 25 feet of hoses into a self-contained disinfectant spraying system for water-based products. Its max 120 psi rating, 80 psi pressure pot, and 5.3 to 7.0 SCFM air delivery focus this sprayer on controlled, medium speed disinfectant application in facilities and shop environments. For teams prioritizing steady coverage and an integrated air and power setup for water-based disinfectant spraying, this model offers defined performance details to align with disinfectant application workflows.