
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
CANTEK JEN-60 drawer notcher is a drawer making machine designed to notch and drill the underside of a drawer box for mounting undermount drawer slides, so one setup handles both cutting and boring where the slide hardware will sit. The pneumatic cutter and drill stroke are operated by a foot pedal, which keeps both hands free to hold and position the drawer box during each cycle. Cutter stroke and drill speed are adjustable, letting you tune the motion for optimum finish results on the notch and the bore in different material types. The machine dimensions of 48 x 37-3/4 x 39-3/4 inches and a net weight of 506 lbs give the notcher a stable footprint for production work. The machine is capable of notching up to 220 drawer boxes, both left and right sides, per hour, which supports higher-volume undermount drawer production.
The Drawer Notcher JEN-60 uses an insert knife cutterhead with solid carbide inserts, which is engineered to provide optimum finish results and long tool life on the underside notch where undermount slides mount. A 2-1/4 inch, or 57 mm, wide cutter allows for a wide range of undermount slides, so one cutter width covers common slide footprints on the underside of the drawer. The machine uses a 1/4 inch, or 6.3 mm, solid carbide drill bit to bore the required hole at the same station as the notch, keeping notch and drill positions coordinated for the slide hardware. With the drill automatically positioning for both left and right drawer notches by activating a switch in the fence, the setup supports repeatable spacing on each end of the drawer box within a single workflow.
The CANTEK JEN-60 drawer notcher is a drawer making machine in the notching category, and it is designed to work on the underside of a drawer box where undermount drawer slides attach. Because it notches and drills the underside in one machine, it fits between drawer box assembly and slide installation, handling the machining step that prepares the box for undermount slide hardware. The pneumatic cutter and drill stroke operated by foot pedal let the operator work quickly while keeping a steady grip on the drawer during the cycle. The machine dimensions of 48 inches long, 37-3/4 inches wide, and 39-3/4 inches high help it stand as a dedicated station in a machining cell, while the 506 lb net weight provides mass to handle repetitive drawer loading without shifting. With a capacity to notch up to 220 drawer boxes, both left and right, per hour, the notcher supports a high-throughput workflow for shops focusing on undermount drawer slide systems.
The insert knife cutterhead with solid carbide inserts on the JEN60 is designed for optimum finish results and long tool life, which helps maintain a consistent notch profile over extended runs of drawer boxes. A 2-1/4 inch, or 57 mm, wide cutter provides a wide range of undermount slide coverage, so the machined notch matches the support area needed under common undermount slide designs. The 1/4 inch, or 6.3 mm, solid carbide drill bit bores the necessary hole in the same operation, keeping the hole location aligned to the notch in every cycle. Cutter stroke and drill speed adjustments allow the operator to fine-tune feed behavior for different substrates, which improves the machined surface and reduces rework on the underside of the drawer. The drill automatically positioning for both left and right drawer notches by activating a switch in the fence keeps the layout symmetrical from side to side, and the machine will not cycle unless a drawer is up against the switch, so each operation starts from the same registered reference point against the fence.
The CANTEK JEN-60 drawer notcher is designed to notch and drill the underside of a drawer box for mounting undermount drawer slides, combining both machining steps in one station.
The pneumatic cutter and drill stroke are controlled by a foot pedal, which starts the cycle while your hands hold the drawer box, helping maintain control and positioning during notching.
The drill on the JEN60 automatically positions for both left and right drawer notches by activating a switch in the fence, keeping both ends of the drawer aligned to the same reference.
The drawer notcher uses an insert knife cutterhead with solid carbide inserts and a 1/4 inch solid carbide drill bit, which support an optimum finish and long tool life in production use.
The JEN-60 has a 2-1/4 inch, or 57 mm, wide cutter, allowing for a wide range of undermount slides by providing enough notch width to support common undermount slide footprints.
The machine is capable of notching up to 220 drawer boxes per hour on both left and right sides, supporting higher-volume undermount drawer box production.
The Drawer Notcher JEN-60 - Cantek America JEN60 is built as a drawer making machine focused on undermount drawer slide preparation, combining notching and drilling on the underside of the box in one setup. With a pneumatic cutter and drill stroke operated by foot pedal and adjustable stroke and drill speed, the machine is configured for efficient, controllable cycles in a shop environment. The insert knife cutterhead with solid carbide inserts, matched with a 2-1/4 inch wide cutter and 1/4 inch solid carbide drill bit, gives the notcher a tooling package aimed at optimum finish and long tool life on drawer box machining. For operations needing up to 220 drawer boxes per hour with coordinated left and right notches, this CANTEK JEN-60 drawer notcher aligns the machining step to undermount drawer slide requirements.
Sold In: 1 Each