Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DeWalt DWS713 10 inch compound miter saw uses a 15 amp corded motor delivering 5,000 rpm, which drives the blade with consistent power so framing, trim, and shop cuts stay fast and predictable across long workdays. The saw is a single bevel compound design, so it tilts for angled and compound cuts, letting one station handle everything from baseboard to light framing without constant tool changes. A precise miter system with a machined base fence support holds work solidly, which keeps joints tighter and reduces rework on finish material. The saw has a 10 inch carbide tipped blade, so it reaches typical trim and lumber thicknesses in one pass, helping installations move steadily. A lightweight design with a built-in carry handle lets installers reposition the saw easily between rooms or jobsites, keeping workflow flexible.
The saw bevels from 0 degrees to 48 degrees to the left and 0 degrees to 3 degrees to the right, so it handles common compound cuts while still favoring left-hand bevel work typical in trim setups. That range lets users tackle varied wall conditions and corner details without resorting to separate specialty saws. With a 2 inch by 6 inch dimensional lumber cross cut capacity at 90 degrees, the saw covers many standard framing and blocking tasks, so small structural cuts can be handled on the same station as finish work. A 2 inch by 4 inch dimensional lumber capacity at 45 degrees gives room for angled framing or bracing cuts, which supports on-site adjustments when layouts change. Together, these capacities keep more of the job flowing through one familiar setup.
The 10 inch compound miter saw sits in the Saws and Accessories class, so it is aimed squarely at cutting tasks within woodworking and construction workflows. In trim and finish carpentry, the tall sliding fences that support 4-1/2 inch crown molding vertically nested let crews cut crown in the installed orientation, which helps corners land clean when walls are out of perfect square. The same tall sliding fence supporting 4-1/4 inch base vertically keeps wide baseboard stable, so long runs stay square to the floor line and reduce gaps at inside or outside corners. The 2 inch by 6 inch cross cut capacity at 90 degrees lets installers handle headers, blocking, and light framing in a shop or remodel setting, tying together structural and finish work on one bench. For dimensional lumber cut at 45 degrees, the 2 inch by 4 inch capacity supports common brace and angle cuts, so site adjustments remain simple.
The stainless steel miter detent plate with 14 positive stops resists wear at common angles, so miter settings stay consistent over time and repeated cuts stay aligned across entire rooms of casing or base. A turn knob lock works with the miter detents to secure the chosen angle, so the saw resists drifting even when material is pushed firmly against the fence. The precise miter system and machined base fence support hold workpiece alignment steady, which keeps gaps at joints small and reduces the need for caulk or touch-up work. The bevel range of 0 degrees to 48 degrees left and 0 degrees to 3 degrees right lets the user fine-tune compound angles, supporting more accurate fits on complex corners. The 15 amp motor delivering 5,000 rpm keeps the blade speed high, which supports cleaner cuts that sand quickly and look sharper once finished. A lightweight design with a built-in carry handle keeps setup and breakdown time short, so the saw can follow the crew from rough-in areas to finished spaces without slowing schedules.
The DeWalt DWS713 10 inch compound miter saw uses a 15 amp corded motor delivering 5,000 rpm, which provides steady cutting power for typical lumber and molding tasks.
The stainless steel miter detent plate with 14 positive stops holds common angles accurately, so repeated cuts stay consistent and reduce fine-tuning during installation.
The 10 inch compound miter saw uses tall sliding fences that support 4-1/2 inch crown molding vertically nested, which helps maintain correct orientation while cutting corners.
The DeWalt DWS713 has a 2 inch by 6 inch dimensional lumber cross cut capacity at 90 degrees and a 2 inch by 4 inch dimensional lumber capacity at 45 degrees.
The 10 inch compound miter saw bevels from 0 degrees to 48 degrees to the left and 0 degrees to 3 degrees to the right, covering typical trim and light framing angles.
The DWS713 features a lightweight design with a built-in carry handle, so it can be moved conveniently around shops, homes, or jobsites as work progresses.
The DeWalt DWS713 10 inch compound miter saw combines a 15 amp motor, a stainless steel miter detent plate with 14 positive stops, and a precise miter system, giving installers a stable cutting station for trim and dimensional lumber. Tall sliding fences that support 4-1/2 inch crown molding vertically nested and 4-1/4 inch base vertically let a single saw handle much of the millwork on a project. The bevel range and cross cut capacities cover common framing and finish angles, while the lightweight design with a built-in carry handle supports job-to-job moves. For shops and field crews needing a compact, capable saw that stays accurate under repeated use, this 10 inch compound miter saw is built to keep work moving efficiently.