Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2032 stock feeder delivers powered material feed so the workpiece stays moving at a steady rate across the cutter. The 3 rollers on this feeder grip the stock along its length, which helps maintain even pressure on wider or longer pieces. Four available speeds at 13, 26, 29, and 59 feet per minute let the operator match feed rate to the cut, from heavier shaping to lighter finishing passes. The 1/4 HP motor drives the rollers with steady torque, giving small shops a compact feeder that supports smoother cuts. A 3-1/8 inch roller diameter provides a broad contact surface on the work, while the 1-1/8 inch roller width focuses pressure in a controlled track. Weight of 78 pounds gives the unit a stable mass that helps it run smoothly when feeding stock.
This 3 roll 4 speed feeder uses its support stand to hold the head at a fixed working height relative to the machine table. Once positioned, the 3-1/8 inch diameter rollers can be set so they bear evenly on the work, helping maintain contact without excessive drag. The 1-1/8 inch roller width defines a clear feed path, so the operator can align stock along that track for repeatable passes. Selecting between the 13, 26, 29, and 59 FPM speeds lets the user balance chip load and finish by choosing slower feed for heavier cuts or faster feed for lighter passes. The 230V single phase power requirement fits typical small-shop machine circuits, allowing the 1/4 HP motor to drive the feed consistently during production runs.
The STEFF 2032 3RL 4SPD FEEDER works as a dedicated stock feeder on woodworking machines where consistent feed is needed across multiple passes. Three rollers contact the board at separate points, so as minor thickness variations move under the head, the feeder still maintains traction along the length. The 3-1/8 inch roller diameter helps the rollers roll smoothly over small surface irregularities, which supports continuous feeding of typical shop stock. With a roller width of 1-1/8 inch, the feeder sets a defined lane for material, making it straightforward to repeat same-width work along that path. The 78 pound weight provides a solid base, so once the support stand is set, the feeder remains steady as it drives stock.
The four speeds at 13, 26, 29, and 59 FPM let the operator dial in feed rate to match tooling and desired surface quality, which can reduce sanding or rework after machining. On heavier cuts, the lower speeds help keep chip load manageable, while the higher speeds support faster throughput on lighter passes. The 1/4 HP motor is sized to power the three rollers, providing driven feed without overcomplicating electrical demand in a typical shop. Because the unit is complete with support stand, the feeder head can be dedicated to a machine position, reducing setup changes between jobs. The combination of 3 rollers, defined roller width, and selectable speeds gives the shop a predictable feed system that supports consistent results from run to run.
The Maggi Steff 2032 stock feeder provides four feed speeds at 13, 26, 29, and 59 feet per minute, so material flow can be matched to the cut and desired finish.
The three rollers on this feeder contact the stock at multiple points, which supports steady traction and more uniform feeding across the workpiece length.
The 3-1/8 inch roller diameter provides a broad contact area on the stock, helping the feeder roll smoothly and maintain consistent pressure during feeding.
The 1-1/8 inch roller width creates a defined feed lane, which helps the operator guide boards along a consistent path through the cutting area.
The STEFF 2032 3RL 4SPD FEEDER uses a 1/4 HP motor operating on 230V single phase, providing driven feed power suitable for typical small-shop circuits.
The support stand holds the feeder at working height, allowing the head to be positioned for consistent roller contact and repeatable stock feeding on the machine.
The Maggi Steff 2032 stock feeder combines three rollers, four selectable speeds, and a 1/4 HP 230V single phase motor to provide controlled feed on woodworking machines. With 3-1/8 inch diameter, 1-1/8 inch wide rollers and a stable 78 pound build, it supports steady material movement through the cutting zone. The complete unit with support stand lets the feeder function as a dedicated feed solution in the shop. For operations that depend on consistent stock handling, this STEFF 2032 3RL 4SPD FEEDER gives a defined feed lane and adjustable speeds tailored to daily production needs.
Sold In: 1 Each