Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2034 stock feeder gives woodworking machines a steady, powered feed using its three rollers, so material moves through the cut at a controlled pace for more predictable results on repetitive operations. The 4-speed drive offering 13, 26, 36, and 72 FPM lets you match feed rate to cut quality or production speed, helping balance finish needs with job throughput. A 4-3/4 inch roller diameter provides a broad contact patch on the workpiece, helping grip the stock firmly as it passes the cutter. The 2-1/4 inch roller width focuses that grip where it is needed, which supports feeding boards or components in a defined track across the table. The unit operates on 230V single-phase power, aligning with common shop electrical service, so it can be added to many machines in a professional or serious DIY setting without changing basic power supply.
The Steff 2034 feeder is supplied as a 3-roll unit on a universal support column, so the feeder head is held above the machine table for setup. By using this support column, the rollers can be positioned over the cutting area to contact the material as it moves through the machine. The 230V single-phase machine uses a 3/4 HP motor, which provides powered feed while operating on a common single-phase circuit in many woodworking shops. For three-phase installations, the 2034 configuration uses a 1 HP motor, which supports powered feeding on machinery wired for three-phase service. With these defined motor options, the feeder output can be suited to the electrical system already in place around the woodworking equipment.
The Maggi Steff 2034 3-roll feeder with stand is positioned on its universal support column so the rollers extend over the working area of a woodworking machine, allowing the feeder to drive boards or panels through the cutting zone. With three rollers arranged in sequence, the feeder engages the stock before, during, and after the cut, which helps keep pieces moving in a straight path along fences or guides. The 4-3/4 inch roller diameter creates enough contact area to grip typical woodworking stock surfaces during passes, while the 2-1/4 inch roller width keeps the feed pressure focused on the path that aligns with the tooling. At 13 FPM, the slowest speed supports careful feeding where surface finish is a priority, such as finer cutting or shaping work. The higher speeds at 26, 36, and 72 FPM serve tasks where more rapid material movement is useful, such as general dimensioning or repetitive runs of similar parts.
The 4-speed range from 13 to 72 FPM in the Steff 2034 feeder provides discrete choices instead of a single fixed pace, which lets the operator adapt feed motion to different woods, tooling conditions, or job sequences. Three rollers working together apply drive force over a longer contact distance, so as a board enters and exits the cutting area, the feeder maintains traction and helps limit hesitation that can affect cut consistency. The 4-3/4 inch roller diameter and 2-1/4 inch width pair to create a footprint that contacts enough surface to move the work while still fitting on typical machine tables without crowding guides. The 3/4 HP motor on the 1-PH machine supplies dedicated power for feed, separating it from the cutting motor so feed movement remains defined. For shops with three-phase equipment, the 1 HP 3-PH motor option provides additional drive capacity within the same 2034 feeder configuration.
The Maggi Steff 2034 stock feeder offers four speeds at 13, 26, 36, and 72 FPM, so the feed rate can be matched to material, tooling, or finish expectations on a given run.
The Steff 2034 uses three rollers to grip the stock over a longer distance, which supports smoother entry, support through the cut, and exit movement during repetitive feeding.
The Steff 2034 rollers use a 4-3/4 inch diameter and 2-1/4 inch width to create a defined contact patch that helps maintain traction and alignment on boards across the table.
The 230V 1-PH Steff 2034 feeder uses a 3/4 HP motor, providing dedicated feed power while operating on single-phase shop electrical service.
The Steff 2034 feeder in three-phase configuration uses a 1 HP motor, which supports powered feeding on woodworking machines wired for 3-PH service.
The Steff 2034 is carried on a universal support column, allowing the feeder head to be set over the work area so the rollers contact stock where feeding is required.
The Maggi Steff 2034 3-roll, 4-speed feeder with universal support column brings powered feeding to woodworking machines using defined speeds of 13, 26, 36, and 72 FPM. With 4-3/4 inch diameter by 2-1/4 inch wide rollers and motor options of 3/4 HP on single-phase or 1 HP on three-phase, this feeder supports consistent stock movement under cutting operations. At 153 lbs weight, it offers a substantial stock feeder assembly suited to fixed installation in professional and serious DIY shop environments.
Sold In: 1 Each