
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Maggi Steff 2034 stock feeder uses 3 rollers to grip and advance material, which supports smoother, more uniform cuts on woodworking machinery. The 4-speed setup at 13, 26, 36, and 72 feet per minute lets you match feed rate to cut quality or production needs. When slower speeds are used, the workpiece spends more time under the cutter, which supports finer finishes on many operations. Faster speeds move parts through quickly, which suits straightforward ripping or sizing where throughput is important. The 4-3/4 inch roller diameter provides a broad contact patch on the material, helping maintain steady traction over minor surface variations. A 2-1/4 inch roller width focuses that grip into a defined track, which helps keep narrow stock moving in line with the fence or guide surfaces.
The Maggi Steff 2034 3-roll 4-speed feeder is complete with a universal support column, which serves as the base structure for mounting and positioning the unit relative to the machine table. That column supports vertical and horizontal adjustments, which allows the roller group to be set so it bears correctly on the work surface. Feed speeds of 13, 26, 36, and 72 FPM are built into the drive, so speed changes are handled at the feeder rather than at the machine. The system is designed for 440V, 3-phase power, which matches installations wired for that voltage in many commercial shops. Weight of 153 pounds helps the column and head remain steady once positioned, which supports repeatable setups across multiple runs.
The Maggi Steff 2034 3-roll 4-speed feeder is a stock feeder for woodworking machinery in shops that use 440V, 3-phase power. With 3 rollers acting together, it is suited to feeding boards or panels past cutters where continuous, powered movement is needed. The 4-3/4 inch roller diameter spans a practical area over typical stock widths, which helps maintain grip on flat workpieces during operations like ripping or shaping. Its 2-1/4 inch roller width focuses pressure over a controlled strip of material, supporting feeding of narrow parts along a fence or guide. Four preset speeds at 13, 26, 36, and 72 FPM let the feeder handle a range of operations on the same machine, from lower-speed passes that favor finish to higher-speed passes aimed at volume work.
The Maggi Steff 2034 stock feeder uses its 3-roller layout to share pressure across the infeed, mid-span, and outfeed zones, which supports continuous contact as the workpiece moves under the head. This arrangement helps transition material smoothly into and out of the cut, which is important when working with longer boards or panel runs. The combination of 4-3/4 inch roller diameter and 2-1/4 inch roller width defines how the contact area meets the stock, which influences how evenly the force is applied along the feed path. When set to 13 or 26 FPM, the feeder advances material more slowly, which often favors operations where surface finish and control around the cutter are priorities. At 36 or 72 FPM, the same machine movement supports faster processing where the cut is straightforward and throughput matters more. The complete universal support column forms the structural connection between feeder and machine, which allows the head to be located and locked in place over the work zone for repeated setups. An overall weight of 153 pounds adds mass to that structure, which supports stability once the adjustments are set. The system is identified by manufacturer part number MAG-2034-440-3-KIT, which ties these specifications to a specific Maggi and Steff feeder configuration for 440V, 3-phase shops.
The Maggi Steff 2034 3-roll 4-speed feeder is a stock feeder in the machinery stock feeders category, so it is intended to feed material on woodworking machines that accept this style of feeder.
The Maggi Steff 2034 stock feeder uses 3 rollers, which share contact along the feed path to keep material moving steadily past the cutter area.
The feeder provides four feed speeds of 13, 26, 36, and 72 feet per minute, letting the operator choose a rate that suits the cut and throughput goals.
The Maggi Steff 2034 has a 4-3/4 inch roller diameter and a 2-1/4 inch roller width, which define the contact area on the stock for traction and tracking.
The Maggi Steff 2034 feeder is complete with a universal support column, which serves as the mounting structure that positions the feeder above the work area.
The feeder is configured for 440V, 3-phase power and has a listed weight of 153 pounds, which gives the unit substantial mass for stable mounting.
The Maggi Steff 2034 3-roll 4-speed feeder with stand 440V 3-Ph combines 3 rollers, four preset speeds, and a universal support column into one stock-feeding unit. With 4-3/4 inch diameter by 2-1/4 inch wide rollers and 13 to 72 FPM feed options, it is configured for shops wired for 440V, 3-phase power that need consistent material feeding. At 153 pounds and identified as MAG-2034-440-3-KIT, it gives a defined specification set to match to woodworking machinery installations.
Sold In: 1 Each