Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2038 power feeder delivers steady material movement using 3 rollers, which helps keep stock firmly guided across the cutter so passes stay more consistent from piece to piece. The 8 speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM give a range from slow, controlled cuts to faster throughput, so you can match feed rate to cutter size and surface finish targets. The 4-3/4 inch roller diameter keeps a broad grip on the workpiece, spreading pressure over more area so the surface contact stays stable. A 2-1/4 inch roller width provides a compact footprint that still tracks well along typical board widths in small to mid-size shops. The 230V 1-phase machine setup with 3/4 HP motor aligns with common single-phase shop power, so it suits many woodworking environments without needing 3-phase service.
The universal support column supplied with the Maggi Steff 2038 power feeder functions as the primary structure for mounting, so the feeder head can be positioned relative to tables and fences for effective contact. The 3 rollers then engage the stock along their 4-3/4 inch diameter, which creates a defined pressure path that can be aligned to the cutter area. With speeds that span from 6 to 102 FPM, you can select feed rates to suit different material runs while using the same mounted position, which streamlines setup between similar jobs. The 230V 1-phase configuration and 3/4 HP motor provide the drive for the rollers, so the unit can be located where that power is available on the shop floor.
The Maggi Steff 2038 3-roll, 8-speed feeder is part of the stock feeders category, so it serves as a feed solution for woodworking machines that accept external feeders. Its three rollers with 4-3/4 inch diameter and 2-1/4 inch width are sized to work along typical board paths, giving guided feed where consistent pressure over the cutter is needed. Feed speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM allow one machine to support a variety of cut types, from slower passes on demanding profiles to quicker passes on lighter cuts. The 1-phase, 3/4 HP motor combination is matched to a 230V single-phase supply, so the unit fits into many shops that run single-phase equipment on standard woodworking circuits.
The 3-roller layout of the Maggi Steff 2038 power feeder guides stock through multiple contact points, so once the head is positioned on its universal support column, boards follow a predictable path past the tooling. Because the roller diameter is 4-3/4 inches, each roller maintains a generous contact patch on the work, which promotes smoother engagement as boards start and finish a pass. The 2-1/4 inch roller width centers the feed load along a clear track, helping maintain alignment on the fence side for repetitive processing. With eight selectable speeds from 6 to 102 FPM, the same setup can be tuned for either higher-finish passes or faster throughput on production runs, while the 230V 1-phase, 3/4 HP drive keeps the feed powered for continuous operation within its design range.
The Maggi Steff 2038 is a stock feeder in the feeders product class, so it is designed to provide powered feed for woodworking machinery that accepts an external stock feeder.
The Maggi Steff 2038 uses three rollers, giving multiple contact points on the board so material is guided more evenly through the cutting area.
The Maggi Steff 2038 provides eight speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, letting you match feed rate to the cut and desired surface quality.
The Maggi Steff 2038 has rollers with a 4-3/4 inch diameter and 2-1/4 inch width, shaping the contact area that grips and moves the stock.
The Maggi Steff 2038 1-phase machine uses 230V with a 3/4 HP motor, providing the drive power for the three feed rollers in single-phase shops.
The universal support column acts as the mounting structure, letting the Maggi Steff 2038 feeder head be positioned relative to the machine table and fence for effective stock contact.
The Maggi Steff 2038 power feeder with 3 rollers, 8 speeds from 6 to 102 FPM, and 4-3/4 inch by 2-1/4 inch rollers offers a defined feed path for woodworking machines that use stock feeders. Its 230V 1-phase, 3/4 HP drive aligns with many single-phase shops, and the universal support column serves as the mounting structure for positioning the head. For shops needing a stock feeder that combines multiple speeds with a three-roller layout, this configuration from Wurth Baer Supply provides a clearly specified option.
Sold In: 1 Each