Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2038 stock feeder delivers powered material feed for woodworking machinery, so stock advances at controlled speeds instead of by hand. This 3 roller feeder maintains steady contact on the workpiece, helping cuts stay uniform along the full length. The 8 speeds from 6 to 102 FPM let the operator match feed rate to tooling and material, so profiles, rips, and general passes can run at practical production speeds or slower setup speeds. The 4-3/4 inch roller diameter creates a broad contact patch on the board surface, helping reduce slippage during longer passes. A 2-1/4 inch roller width focuses pressure along a defined track, which supports straight feeding on narrow or medium-width work. The feeder is supplied with a stand formed by a universal support column, so the unit positions over the machine table as part of a stable mounting arrangement. Overall weight of 153 lbs keeps the assembly solid during operation.
This 3 roll 8 speed feeder is configured around a universal support column, so the column acts as a stand that carries the feeder over the working area of the woodworking machine. By supporting the head from this column, the installer can locate the rollers in line with fences or guides for consistent feed direction. The 230V 3-phase configuration referenced in the product name aligns this unit with 3-phase shop power, which is common on larger stationary machines. A 1-phase machine pairing uses the 3/4 HP motor, while a 3-phase machine pairing uses the 1 HP motor, so feed power corresponds to the machine power type. With 8 selectable speeds between 6 and 102 FPM, the feeder can be set for slower, controlled passes during setup, then adjusted upward for production once the cut path is established.
The 3 roller design of this stock feeder positions three 4-3/4 inch diameter rollers in sequence, which allows boards to stay engaged with the feed system before, at, and after the cutting zone. As the workpiece enters, the first roller begins moving stock at a defined rate, guiding it toward the tooling. The center roller maintains pressure as the cut takes place, helping keep the board flat and advancing while knives or blades remove material. The trailing roller continues to drive the stock out of the cut, supporting cleaner exits from the tooling path on longer pieces. With an individual roller width of 2-1/4 inches, contact is focused enough to work with stock that aligns to fences or guides, which suits many ripping, profiling, or general machining operations found in woodworking shops.
The 8 speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM allow the operator to select a feed rate that matches both material and tooling, so harder woods or more detailed profiles can be run at lower speeds while straightforward cuts can run faster. This range supports shifting from careful trial passes to repeatable production runs without changing equipment. The universal support column serves as a structural stand for the feeder, which positions the feed rollers over the machine table in a stable manner, helping the head stay aligned once set. Weight listed at 153 lbs helps the column and feeder assembly resist movement during use, which contributes to consistent feed pressure on stock over time. In combination, the adjustable feed range, defined roller dimensions, and column-based mounting arrangement support a workflow focused on steady, powered stock movement rather than manual pushing.
The Maggi Steff 2038 is a 3 roller, 8 speed stock feeder for woodworking machinery, so it provides powered feed of material instead of hand feeding along the machine table.
The stock feeder provides 8 feed speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, so the operator can select slower or faster rates to match the cut and material.
The 4-3/4 inch diameter and 2-1/4 inch width define the roller contact area on the board, which influences grip and tracking as stock advances across the machine table.
The universal support column acts as a stand that carries the feeder over the machine, providing a structural mounting point so the rollers can be positioned where feeding is required.
The feeder uses a 3/4 HP motor when paired with a 1-phase machine and a 1 HP motor when paired with a 3-phase machine, aligning feed power with common shop machine power types.
The 153 lb weight indicates a substantial feeder and stand assembly, which helps the unit remain stable while feeding stock, supporting consistent contact between rollers and workpieces.
The Maggi Steff 2038 stock feeder with 3 rollers, 8 speeds from 6 to 102 FPM, and 4-3/4 inch by 2-1/4 inch rollers is built around a universal support column and 230V power configuration. With motor choices of 3/4 HP for a 1-phase machine and 1 HP for a 3-phase machine, the unit integrates into common woodworking shop setups. For operations needing steady, powered feed across the table, this feeder provides defined speed options and a stable, 153 lb column-supported structure ready to be positioned over the cutting zone.
Sold In: 1 Each