Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2038Ci 3-belt feeder delivers controlled stock movement for woodworking machines, using three belts to grip material so feed stays steady across the table. The 8 available speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM let the operator match feed rate to cut quality, helping dial in surface finish or production pace on a given setup. A 4-3/4 inch roller diameter supports the belts, so contact with the workpiece stays smooth as stock passes under the feeder. Each roller has a 2-1/4 inch width, giving a defined contact track that helps move boards cleanly through the cut line. The 1-phase machine configuration uses a 3/4 HP motor, providing powered feed where single-phase power is standard. The 3-phase machine configuration uses a 1 HP motor, supporting applications where three-phase power is available in the shop.
The Steff 2038Ci stock feeder uses a universal support column to hold the belted head over the machine, so the feeder can be located where feed pressure aligns with the cutter. With this support column, the unit can be set in a working position relative to the fence and table surface, helping the belts carry material in line with the cutting path. The 8-speed design with settings at 6, 13, 18, 21, 36, 42, 54, and 102 FPM provides discrete choices rather than variable adjustment, giving operators clear, repeatable speed selections for a given job. The 4-3/4 inch roller diameter and 2-1/4 inch roller width define how the belts contact the stock, which helps plan feeder placement in relation to workpiece width and expected cutting forces.
This 3-belt 8-speed stock feeder works as a belted drive system that moves workpieces past a cutting tool at controlled rates, supporting repeatable passes in woodworking operations that use stock feeders. The eight distinct feed speeds - 6, 13, 18, 21, 36, 42, 54, and 102 FPM - give flexibility to pair feed rate with the cutting task, so slower speeds can be selected for demanding cuts while higher speeds handle lighter passes. The 4-3/4 inch roller diameter lifts the belts over the table, so the contact surface rolls across the board rather than sliding, which supports smooth movement during longer runs. With a 2-1/4 inch roller width, each belt engages a focused band on the stock, helping move material along the intended line when guided by fences and tables. The 3-belt layout spreads contact across more of the workpiece path than a single belt, which helps keep traction more even over the length of the cut.
The 1-phase machine configuration with a 3/4 HP motor fits locations wired for single-phase power, so the Maggi Steff 2038Ci 3-belt feeder can be used in shops where this is the standard supply. The 3-phase machine configuration with a 1 HP motor suits facilities equipped for three-phase power, aligning the stock feeder with heavier shop infrastructure where that service is present. The universal support column carries the belted feeder head above the machine, giving a structural point from which to position the belts over the work area so feed pressure is directed onto the stock path. With a total weight of 153 lbs, the feeder and column form a solid assembly that remains steady once set, which supports consistent belt contact for pass after pass. In combination, the motor configurations, support column, and weight help this feeder integrate into a woodworking machine setup where predictable feeding is important.
The Maggi Steff 2038Ci 3-belt feeder provides eight feed speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, so operators can select a speed that matches the required cut and workflow.
The universal support column carries the feeder above the machine, allowing positioning so belt pressure is directed along the desired stock path for consistent feeding during cuts.
The 4-3/4 inch roller diameter and 2-1/4 inch roller width define how the belts contact the stock, which helps plan feeder placement for stable tracking on the workpiece.
The 3-belt design spreads drive across multiple contact lines on the workpiece, supporting even traction and helping keep material moving steadily through the cut.
The 1-phase machine configuration uses a 3/4 HP motor for single-phase power, while the 3-phase machine configuration uses a 1 HP motor for shops with three-phase electrical service.
The 153 lb weight places the feeder and support column in a substantial assembly, helping the system stay stable once set for repeated feeding operations.
The Maggi Steff 2038Ci belted feeder with three belts, eight speeds from 6 to 102 FPM, and rollers sized at 4-3/4 inch diameter by 2-1/4 inch width offers defined feed control for woodworking machines. The universal support column and total weight of 153 lbs provide a stable structure to hold the feeder in working position over the table. With a 1-phase machine configuration using a 3/4 HP motor and a 3-phase configuration using a 1 HP motor, this stock feeder aligns with different shop power supplies. When a job calls for controlled, repeatable stock feeding, these combined details help this 2038Ci unit serve as a dedicated drive solution at the machine.
Sold In: 1 Each