Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2038Ci 3-belt feeder provides powered stock feed using three belts, so workpieces move past the cutter with steady pressure that improves finish quality and helps maintain a uniform feed rate across the run. The 8-speed setup with feed rates of 6, 13, 18, 21, 36, 42, 54, and 102 feet per minute lets you match feed speed to material and operation, supporting both slower profiling and faster straight runs on the same machine. A 4-3/4 inch roller diameter supports solid contact on the work surface, which helps reduce slip as boards travel through the cutting area. The 2-1/4 inch roller width focuses pressure into a defined track, which is useful when feeding narrower workpieces through a consistent path.
This Maggi Steff 2038Ci 3-belt 8-speed feeder is supplied as a kit complete with a universal support column, so the feeder mounts on an adjustable stand that can be aligned to the cutter height and position. The stand-based mounting gives a fixed reference from the machine table to the feed rollers, which supports repeatable positioning when moving between operations on the same tool. With the feeder supported by a dedicated column, the feed unit remains stable during use, which helps maintain consistent pressure on the stock as it travels through the cutting zone.
The Maggi Steff 2038Ci belted feeder with 3 belts and 8 speeds fits into woodworking workflows that use machinery needing consistent stock feed, because its powered rollers move the material instead of relying on manual pushing. In a shop using 1-phase equipment, the 3/4 HP motor configuration matches machines wired for single-phase power, so the feeder can be integrated into existing electrical service without changing the motor type on the tool. In environments with 3-phase machines, the 1 HP motor configuration suits heavier-duty tools, since the extra motor power helps sustain feed on more demanding passes. The universal support column allows the feeder and stand to serve multiple setups on compatible machinery, as the column provides a common mounting approach around which different operations can be arranged.
The three-belt design on this Maggi Steff 2038Ci 3-belt 8-speed feeder spreads drive across the width of the stock, so light variations in board width or surface contact are less likely to interrupt feeding, which supports consistent cutter engagement and more repeatable profiles. Having feed rates from 6 up to 102 feet per minute lets an operator select slower speeds when demanding surface finish is important and faster speeds when productivity matters more, which helps balance cut quality and throughput from job to job. The 4-3/4 inch roller diameter and 2-1/4 inch roller width define the contact patch on the workpiece, giving a known pressure zone that can be aligned relative to fences and guides for repeatable tracking. The universal support column that completes this kit creates a dedicated mounting structure, so once the column position is dialed in relative to a machine table, the feeder can return to that setting for similar tasks, reducing time spent repositioning between repeated setups.
The Maggi Steff 2038Ci is a belted feeder with 3 belts and 8 feed speeds, which provides powered stock feed for woodworking machinery using multiple traction points.
The Maggi Steff 2038Ci provides 8 feed speeds at 6, 13, 18, 21, 36, 42, 54, and 102 feet per minute, allowing matching of feed rate to different operations and materials.
The Maggi Steff 2038Ci has a 4-3/4 inch roller diameter and a 2-1/4 inch roller width, defining the contact area where the feeder applies pressure to the workpiece.
The Maggi Steff 2038Ci uses a 3/4 HP motor on a 1-phase machine and a 1 HP motor on a 3-phase machine, aligning motor size with the electrical phase of the connected equipment.
The Maggi Steff 2038Ci 3-belt 8-speed feeder kit is specified as 230V, 3-phase, which defines the electrical supply required for the 3-phase configuration.
The Maggi Steff 2038Ci feeder kit is complete with a universal support column, providing a stand that supports positioning and alignment of the feeder relative to the machine.
The Maggi Steff 2038Ci 3-belt 8-speed feeder with universal support column and 230V 3-phase configuration offers defined feed speeds, known roller dimensions, and a dedicated stand, so it can be matched to woodworking machines needing powered stock feed and stable, repeatable material handling.
Sold In: 1 Each