Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2044 stock feeder is a 4-roll, 4-speed feeder designed to move workpieces at controlled rates, which supports smoother cuts and steadier control on woodworking machines. The feeder uses 4 rollers, so the stock is held over a longer contact area, helping maintain grip as material enters and exits the cutting zone. Its 4-speed system provides feed rates of 13, 26, 36, and 72 feet per minute, letting the operator match feed speed to cut quality and material hardness. A 4-3/4 inch roller diameter creates a broad contact patch on the workpiece, which helps reduce marking while still transmitting drive force. The 2-1/4 inch roller width spreads that force across more surface, which helps when handling wider boards or panels. A 3/4 HP motor on 1-phase power drives the unit, giving shops with single-phase service a powered feed option.
This 4-roll feeder is supplied as a 1-phase machine, which allows it to run on single-phase 230V shop power where that service is available. The 3/4 HP motor on the 1-phase version provides driven feed without depending on machine operators to push stock, which helps support consistent surface contact with fences and guides. A universal support column is part of the assembly, giving the feeder a structural post and arms that hold the head over the work area so rollers can be positioned relative to the machine table. With roller diameters of 4-3/4 inches and widths of 2-1/4 inches, the mounted feeder can apply pressure over a defined area of the board, which supports repeatable stock hold-down once the column is set.
The Maggi Steff 2044 4-roll, 4-speed feeder belongs in woodworking shops that use powered feeding to move stock across cutters. Its 4 rollers engage the workpiece at multiple points, which helps keep boards moving in line with fences or guides once positioned under the head. Feed rates of 13, 26, 36, and 72 FPM cover a range from slower, more controlled passes to faster, production-oriented movement, which supports different machine tasks using the same feeder. The 4-3/4 inch roller diameter supports contact across uneven areas of typical lumber or panel stock, helping the feeder sustain drive as the board travels across the table surface. A 2-1/4 inch roller width gives each roller a modest footprint, which works for feeding narrow edge work while still supporting wider faces when rollers are positioned across the stock.
The combination of 4 rollers and 4 selectable speeds lets the operator align feed pressure and speed with the cut, which supports consistent chip load and surface quality once the machine is tuned. The lower feed rates, 13 and 26 FPM, allow longer cutter engagement on each pass, which helps when a finer finish is desired or when profiles are more delicate. The higher 36 and 72 FPM feed rates move material through more quickly, which benefits operations focused on throughput where surface requirements allow faster feeding. A 3/4 HP motor on the 1-phase version delivers mechanical power to maintain those speeds under normal loads, which supports running consecutive pieces without large feed rate drop-off. The universal support column provides the structural base that positions the feeder, which helps keep roller pressure stable from piece to piece once the column is locked. Together, these characteristics support repeatable feeding behavior during ongoing production work.
The Maggi Steff 2044 stock feeder offers 4 speeds at 13, 26, 36, and 72 feet per minute, which lets operators choose between slower finishing passes and faster production runs.
This 4 roll wood stock feeder uses 4 rollers, so the workpiece stays under driven contact for a longer distance, helping maintain steady movement through the cutting area.
The Steff 2044 feeder has a 4-3/4 inch roller diameter and 2-1/4 inch roller width, giving each roller a defined footprint that balances traction with surface contact.
This power feeder in the 1-phase configuration uses a 3/4 HP motor, providing driven feed for woodworking operations powered from appropriate single-phase 230V service.
The universal support column supplies a structural mount for the feeder head, allowing the rollers to be positioned over the work area so feed pressure is applied where needed.
The Maggi Steff 2044 unit weight is listed at 163 pounds, which reflects a substantial structure that helps keep the feeder stable once mounted in a shop setup.
The Maggi Steff 2044 4-roll, 4-speed feeder with universal support column provides powered feeding using a 3/4 HP, 1-phase motor and four rollers sized at 4-3/4 inch diameter by 2-1/4 inch width. Its speed options of 13, 26, 36, and 72 FPM let the shop match feed to the machine task. For operations that rely on consistent stock movement across cutters, this configuration offers defined roller dimensions, selectable feed rates, and a mounting column to position the head over the work area. Select this model when a 230V single-phase, column-mounted stock feeder with multiple speed choices fits the planned woodworking workflow.
Sold In: 1 Each