Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2048 stock feeder delivers controlled material feed for woodworking machinery by using four powered rollers to move workpieces at set speeds, which supports smoother cutting results on repetitive runs. This feeder has 4 rollers, so it presses across a longer contact area, helping keep boards tracking while they pass the cutting zone. The 8 speeds of 6, 13, 18, 21, 36, 42, 54, and 102 FPM let you match feed rate to the operation, so you can choose slower speeds for cleaner cuts or faster speeds for higher throughput. Each roller has a 4-3/4 inch diameter and 2-1/4 inch roller width, giving a stable grip profile across typical shop stock widths. The 230V 1-phase configuration fits shops wired for single-phase power, providing powered feeding where three-phase service is not used.
The Maggi Steff 2048 4-roll 8-speed feeder with stand 230V 1-Ph is described as complete with a universal support column, which provides a mounting structure so the feeder can be positioned relative to the machine table. That universal support column gives an adjustable post-style support, allowing the feeder head to be set at working height and orientation over the stock path. The 1-PH machine configuration identifies this unit for single-phase electrical service, aligning with many smaller and mid-sized woodworking shops. The SAP description listing 230V 1PH clarifies the voltage and phase, which matters when tying the feeder into existing shop circuits. The note that it is available in single and three phase signals that the model range covers both power types, giving shops with different electrical service options within the same product family.
This Maggi Steff 2048 4-roll 8-speed feeder uses four rollers to push stock consistently across a machine table, which helps support straight, repeatable passes when ripping, shaping, or similar operations. The 8 speeds of 6, 13, 18, 21, 36, 42, 54, and 102 FPM give a broad operating envelope, so slower settings can be chosen when cut quality is critical and higher settings can be used when volume is the priority. With each roller measuring 4-3/4 inches in diameter, the feeder presents a large rolling surface to the work, which helps keep contact stable as the board rises slightly over minor surface variations. The 2-1/4 inch roller width focuses traction along a defined strip of the stock, supporting steady pull without excessive side drag. For shops running mixed materials, this combination of roller size and speed steps allows feed behavior to be tuned to the job.
The specification noting a 3/4 HP motor for the 1-PH machine and a 1 HP motor for the 3-PH machine shows that the single-phase version in this kit uses 3/4 HP drive power, which provides the torque to keep the four rollers moving under normal loading. The 1-PH machine detail ties the Maggi Steff 2048 stock feeder to single-phase shop power, which is common in many smaller woodworking operations and supports installation without three-phase service. The SAP description stating 230V 1PH gives a clear voltage level, so the feeder can be aligned with a matching 230-volt circuit in the shop. Being complete with a universal support column means the feeder head is carried on a dedicated stand-style column, which lets the unit be positioned over the work zone and then left set for repeat runs. The overall weight of 163 lbs helps the support column and feeder assembly resist movement, which supports consistent feed alignment across multiple shifts.
The Maggi Steff 2048 stock feeder uses four powered rollers to move workpieces at controlled speeds, which supports smoother, more consistent passes across woodworking machinery.
The Maggi Steff 2048 stock feeder provides 8 feed speeds of 6, 13, 18, 21, 36, 42, 54, and 102 FPM, allowing the feed rate to be matched to different woodworking operations.
The Maggi Steff 2048 stock feeder in this kit is described as a 230V 1-phase machine, aligning with single-phase electrical service in many woodworking shops.
The 4-3-4 inch roller diameter gives a large contact arc on the stock, which supports smooth engagement and continuous traction as boards travel past the tooling.
The universal support column carries the feeder head and allows positioning relative to the machine table, so the rollers can be set over the stock path for consistent feeding.
The Maggi Steff 2048 stock feeder weighs 163 lbs, giving the assembly mass that helps it stay stable on its support column during continuous shop use.
The Maggi Steff 2048 4-roll 8-speed feeder with stand 230V 1-Ph, part number MAG-2048-230-1-KIT, combines four rollers, 8 selectable feed speeds, and a universal support column to deliver controlled material movement. The 230V 1-phase setup aligns with single-phase shops, while the listed 163 lb weight and dedicated support column provide a solid mounted platform for everyday woodworking use. For operations that value consistent feed pressure and adjustable feed rates, this stock feeder configuration offers a defined set of speeds, motor power, and roller dimensions that support repeatable cutting performance.
Sold In: 1 Each