Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2048 4-roll feeder gives woodworking shops a powered stock feeder with eight preset speeds, helping maintain steady material movement across machine tables for smoother operations and more consistent cutting conditions on suitable machines.
The 4 rollers on the Maggi Steff 2048 feeder grip workpieces at multiple points, promoting even pressure as stock advances, which supports more uniform feeding along the fence or guide surfaces during continuous runs.
Eight speeds at 6, 13, 18, 21, 36, 42, 54, and 102 feet per minute let the Maggi Steff 2048 feeder match feed rate to different machining tasks, so operators can select slower or faster movement to suit varying material demands and cutting requirements.
The feeder is part of the stock feeders category in the machinery line from Maggi and Steff, positioning this model as a dedicated solution for powered feeding where stable advancement and repeatable travel are priorities in day-to-day shop work.
The Maggi Steff 2048 feeder is complete with a universal support column, giving the feeder a structural stand and mounting point so it can be positioned over machine tables in a fixed, repeatable orientation for powered feeding.
The universal support column on this feeder plays a central role in positioning the 4 rollers relative to fences and cutter areas, which supports alignment for feed direction and contact height across different machine set-ups.
The 3-phase machine version of this feeder uses a 1 HP motor, providing power for the 4 rollers across the 8 available speeds, which supports continuous stock movement during longer production runs in shops using three-phase service.
The product data notes that the Maggi Steff 2048 feeder is available in single and three phase, and in this configuration the 3-phase 1 HP motor aligns with the 230V 3-phase requirement, giving shops with that service a defined power match.
The Maggi Steff 2048 4-roll 8-speed feeder is part of the stock feeders category, fitting into woodworking environments where powered feeding is preferred over manual pushing to maintain consistent stock travel.
The 4-3/4 inch roller diameter on this feeder shapes how the rolls contact work surfaces, giving a rounded engagement that supports traction over minor surface variations while material advances toward tooling on suitable machines.
The 2-1/4 inch roller width on each roll defines the footprint that contacts the workpiece, contributing to stable feeding by spreading force over a defined band as stock moves under the feeder head during operations.
The 163 pound weight of the Maggi Steff 2048 feeder provides mass that works with the universal support column, supporting rigidity at the mounting joints when the head is extended over machine tables for feeding tasks.
The universal support column supplied with this model serves as the structural link between the machine base area and the 4-roll head, allowing the feeder to occupy a fixed position so speeds and roller pressures can work consistently along the feed path.
Because the Maggi Steff 2048 feeder is described with specific speed settings at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, shops can choose a feed rate that aligns with the type of cut and material being processed, supporting repeatable throughput targets.
The Maggi Steff 2048 4-roll feeder combines its 8-speed selection with a 1 HP motor on the 3-phase machine, giving the power unit defined output to drive all four rollers at the listed speeds, which supports predictable feed rates during repeated setups.
The presence of four rollers means stock is engaged across multiple points at once, so as material enters and exits the feeder, contact is handed off between rolls, helping maintain traction for smoother transitions across the cutter area.
The 4-3/4 inch roller diameter and 2-1/4 inch roller width work together to define the pressure patch each roll applies, which supports maintaining steady contact on workpieces while reducing abrupt changes in how force is applied along the feed line.
The universal support column provides a dedicated mounting framework for the feeder head, allowing the 4-roll assembly to remain in a defined plane over the machine surface, which supports repeated positioning of stock under similar conditions across production shifts.
The specific speed steps ranging from 6 to 102 FPM help create a structured approach to feed-rate selection, so operators can return to known settings that have worked for similar stock and tooling, supporting consistent process planning.
The designation of this model as Maggi Steff 2048 with 4 rollers and 8 speeds clearly positions it among machinery stock feeders, giving shops a defined reference point when standardizing on a powered feeding solution for routine woodworking operations.
The Maggi Steff 2048 4-roll feeder is a stock feeder with four rollers and eight speeds, giving woodworking shops powered material feeding for operations that benefit from continuous, controlled stock movement.
The Steff 2048 feeder offers 8 speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, letting users choose feed rates suited to different machining tasks and production goals.
The Steff 2048 feeder uses 4-3/4 inch diameter, 2-1/4 inch wide rollers, shaping the contact area and helping maintain stable traction on workpieces as they advance under the feeder.
The 3-phase Steff 2048 feeder uses a 1 HP motor, supplying power to the four rollers so they can maintain the specified feed speeds across extended runs on suitable machines.
The universal support column gives the feeder a dedicated stand and mounting structure, helping position the 4-roll head over machine tables in a stable, repeatable orientation.
The 163 pound weight indicates a substantial unit mass, which supports rigidity at the base and column during operation, helping the feeder stay steady while driving stock.
The Maggi Steff 2048 4-roll 8-speed feeder with stand, in its 230V 3-phase configuration, provides a defined combination of 4 rollers, 8 speeds, and a 1 HP motor, giving woodworking shops a clearly specified stock feeder for powered material advancement.
With roller dimensions of 4-3/4 inch diameter and 2-1/4 inch width, eight feed speeds from 6 to 102 FPM, a universal support column, and a total weight of 163 pounds, this feeder offers known parameters for planning consistent shop feeding setups.
Sold In: 1 Each