
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Maggi Steff 2048 4-roll feeder gives woodworking shops controlled stock feed across your machines using four powered rollers. The 4-3/4 inch roller diameter and 2-1/4 inch roller width support solid contact on the workpiece, which helps maintain steady pressure for predictable cut quality. Eight speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM let you match feed rate to cutter type and material, so you can balance finish quality with throughput. The 440V 3-phase, 1 HP motor is built to drive the four rollers at all eight feed speeds, which supports smooth feeding on longer runs in production environments. This feeder weighs 163 lbs, giving the unit a substantial base mass that helps it stay stable while feeding stock. The machine is part of the Maggi and Steff line of machinery stock feeders, aligning it with an established feeder platform used in woodworking.
The Maggi Steff 2048 4-roll feeder is supplied complete with a universal support column, which serves as the fixed structure for mounting the feeder above or beside your woodworking machine. That universal column provides the main adjustment point to move the head into position, so you can bring the 4-3/4 inch diameter rollers directly over the feed path. With four rollers and speeds from 6 to 102 FPM powered by the 440V 3-phase, 1 HP motor, the mounted head can be set up to deliver uniform pressure along the board travel. The 163 lb total weight of the unit contributes to how solidly the column and head stay once set, which is important when you are feeding stock repeatedly at the same location for consistent results.
The Maggi Steff 2048 4-roll feeder sits in the machinery stock feeders category, placing it in the workflow wherever controlled stock movement across a cutter is required. In shops across Illinois, Kansas, Kentucky, Michigan, Missouri, Nebraska, New Jersey, New York, Ohio, Pennsylvania, and Wisconsin, its availability supports use on shapers, small moulders, or similar machines that accept stock feeders. The four rollers, each 4-3/4 inches in diameter and 2-1/4 inches wide, form the contact system that pulls stock through the cut line, so the operator guides and supports rather than pushing by hand. Paired with the universal support column, the feeder head can be brought into position relative to the machine table, allowing the roller train to cover the work zone that sees the most cutting. Within Maggi and Steff machinery offerings, this model serves as a powered feeding solution matched to 440V 3-phase power where continuous or repetitive cuts are common.
The Steff 2048 stock feeder uses eight preset speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, which directly affects how fast material passes the tooling. Slower speeds like 6 or 13 FPM help when the cutter profile is intricate or the material demands more dwell time at the tool, supporting cleaner edges. Higher speeds such as 54 or 102 FPM suit straighter profiles or operations where throughput is prioritized, helping move runs of similar parts efficiently. The 440V 3-phase, 1 HP motor provides the torque to maintain those speeds across the four 4-3/4 inch diameter rollers, so feed remains steady as boards move through. Roller width of 2-1/4 inches focuses that driving force on a controlled strip of the workpiece, promoting consistent traction across many passes. Together with the 163 lb overall mass and universal support column, these details support repeatable feed alignment and pressure, which matters when jobs require uniform results from the first part to the last.
The Maggi Steff 2048 3-phase machine uses a 1 HP motor, which supplies power for driving the four rollers at the eight available feed speeds in typical woodworking operations.
The Maggi Steff 2048 feeder offers eight speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, letting operators select a feed rate suited to the cut and material.
The 4-3/4 inch roller diameter helps keep steady contact on the workpiece as it passes under the feeder, supporting smooth, controlled stock movement across the cutter.
The rollers are 2-1/4 inches wide, concentrating pressure across a focused contact band that helps grip standard board widths during feeding.
The Maggi Steff 2048 feeder weighs 163 lbs, providing mass that helps the mounted unit feel solid and stable while feeding stock through repeated cuts.
This Maggi Steff 2048 4-roll 8-speed feeder is available in Illinois, Kansas, Kentucky, Michigan, Missouri, Nebraska, New Jersey, New York, Ohio, Pennsylvania, and Wisconsin.
The Maggi Steff 2048 4-roll 8-speed feeder with universal support column provides a defined way to power-feed stock using four 4-3/4 inch diameter, 2-1/4 inch wide rollers. Its 440V 3-phase, 1 HP motor and eight speeds from 6 to 102 FPM align with production-focused woodworking where consistent feed rate is important. At 163 lbs, this machinery stock feeder delivers a substantial, table-mounted presence that supports repetitive work across your cutters. For shops in the specified distribution states looking to add powered feeding to existing machines, this model offers a clearly defined set of speeds, roller dimensions, and 3-phase power that ties directly into daily workflow.
Sold In: 1 Each