Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi Steff 2068 stock feeder delivers controlled material feed using 6 rollers, which stabilizes workpieces and supports smoother cutting on suitable woodworking machines. The 8 speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM let operators match feed rate to cutter type and material, helping balance surface finish with throughput. A 1 HP motor powers the feeder, providing steady drive to the rollers so feed remains consistent under normal shop loads. The 4-3/4 inch roller diameter gives a firm contact area that helps grip stock across a useful range of thicknesses. A 2-1/4 inch roller width focuses pressure along the feed path, which supports uniform tracking through the cut. Weight of 220 lbs. adds mass to the unit, helping the feeder stay planted and resist movement during operation.
The Maggi Steff 2068 stock feeder is complete with a universal support column, which provides the structural link between feeder head and machine. That universal support column gives a dedicated mounting structure so the 6 rollers can be positioned accurately over the table. The column allows the feeder assembly to be held at working height, which supports aligning roller pressure to the workpiece surface. With the 1 HP motor and roller group anchored on this support, the feeder can operate while keeping its weight and forces directed through a fixed point, helping maintain consistent feed geometry.
The Maggi Steff 2068 6-roll, 8-speed feeder fits into woodworking workflows where controlled, powered feed is needed across a table-mounted operation. Six rollers contact the stock along a run, which supports steady advancement past cutting or shaping tools on appropriate machinery. The 4-3/4 inch roller diameter and 2-1/4 inch roller width combine to create a defined contact patch, helping the feeder maintain grip on boards during continuous production passes. Eight speeds from 6 up to 102 FPM give flexibility to run slower when surface quality is critical or faster when throughput is the priority. In combination with the 1 HP motor, these speed options support a range of material types and cut depths under typical shop demands. Weight of 220 lbs. keeps the unit substantial on its universal support column, so the feeder head can stay stable while feeding stock.
On the Maggi Steff 2068, six rollers distribute hold-down and drive over more contact points, which helps keep the workpiece engaged with the table and fence throughout the pass. This multi-roller layout supports more uniform pressure than a smaller roller count, which can contribute to cleaner, straighter cuts. The 8 selectable speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM give operators specific rate choices rather than a single fixed feed, which helps tune chip load and surface finish to the tooling in use. A 1 HP motor provides the driving power for these speeds, which supports holding a chosen feed rate through the cut. The 4-3/4 inch diameter and 2-1/4 inch width rollers define how the feeder contacts the board, and that defined geometry helps with consistent tracking from piece to piece. Combined with the 220 lb. overall weight and universal support column, these features work together so the feeder can be set in position and used repeatedly with stable feed behavior over production runs.
The Maggi Steff 2068 stock feeder uses a 1 HP motor, which delivers the driving torque to the six rollers and supports consistent feed speeds under typical woodworking loads.
The Steff 2068 stock feeder provides 8 feed speeds at 6, 13, 18, 21, 36, 42, 54, and 102 FPM, allowing the feed rate to align with tooling and material needs.
The Steff 2068 has rollers with a 4-3/4 inch diameter and 2-1/4 inch width, giving a defined contact area that supports grip and tracking of the workpiece.
The universal support column provides a dedicated mounting structure, allowing the feeder head to be positioned and held at working height over the machine table.
The Steff 2068 uses six rollers to spread hold-down and drive along the board, which supports stable feeding and consistent contact during passes across the cutter.
The Maggi Steff 2068 feeder assembly weighs 220 lbs., giving the unit substantial mass that helps keep the feeder stable while operating on the support column.
The Maggi Steff 2068 6-roll, 8-speed feeder with 1 HP motor, 4-3/4 inch by 2-1/4 inch rollers, and universal support column offers a defined solution for powered stock feeding. For woodworking setups needing stable, adjustable feed rates, this feeder aligns with production-focused operations.
Sold In: 1 Each