
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Maggi Steff 4 roll stock feeder gives you a variable speed feeding solution for machinery using four rollers, so stock is driven steadily through the cut for smoother work on woodworking machines. The feeder is powered by a motor matched to the machine supply, with a 0.75 HP motor for a 1-phase machine and a 1 HP motor for a 3-phase machine, which delivers appropriate drive force for different shop setups. Variable speed from 9 to 59 FPM lets you match feed rate to material and cutter demands, helping balance surface finish and throughput. A 4-3/4 inch roller diameter works with the feed range to provide firm traction on boards over a generous contact area. The 2-1/4 inch roller width concentrates that contact, which improves grip on typical workpiece widths in cabinet and millwork production. The unit weight of 155 lbs helps the stand-mounted feeder stay planted for stable operation.
The speed adjustment system uses a belt on a conical aluminum pulley, which changes pulley diameter as the belt position shifts and thereby alters feed speed for practical control without swapping drive components. A turn knob sets the required speed without the need to change the position of the gears, so feed rate changes during a job can be made quickly with minimal interruption. A min - max plate indicates the rotation direction to obtain the required speed, giving a clear visual reference when setting rotation for slower or faster feeding. The 230V 3-phase configuration in this MAG-VAR4-230-3-KIT version matches common 3-phase shop power, so the 1 HP motor on a 3-phase machine can be integrated into an existing three-phase environment.
This VARIOSTEFF 4 4-roll variable speed feeder is part of the machinery stock feeders class, so it is aimed at driving material through woodworking machines where consistent pressure and speed are required. The variable speed range from 9 to 59 FPM means it can support slower passes where cutter load or tearout risk is higher, as well as faster passes on straightforward shaping or straight-line feeding. The 4-3/4 inch roller diameter and 2-1/4 inch roller width suit common furniture and cabinet stock sizes, which keeps contact focused on the work rather than the table. Four rollers let the feeder maintain contact before and after the cut zone on most setups, which supports straighter tracking through knives or blades. The stand allows the feeder to be located relative to the machine table so that these roller dimensions can be positioned effectively along the feed path.
The use of a belt on a conical aluminum pulley for speed adjustment means feed changes act smoothly along a continuous range, which helps dial in a speed suited to each profile or material without stepping between fixed gear ratios. The turn knob control for the required speed without changing gear position shortens the time needed to fine-tune feed rates between setups, supporting more consistent output when workpieces vary through the day. The min - max plate showing rotation direction tied to the required speed gives a direct link between knob movement and expected feed behavior, which reduces the chance of unintentional speed settings. Having a 1 HP motor on a 3-phase machine offers power capacity appropriate for maintaining feed under load, which supports even surface quality across each board at the chosen FPM. Together, these elements give installers and shop teams a controllable feeding system that holds speed and pressure to support repeatable machining results.
The Maggi Steff 4 roll stock feeder offers variable speed from 9 to 59 FPM, which lets operators choose slower or faster feed rates to balance cut quality and productivity.
The VARIOSTEFF 4 feeder uses a belt on a conical aluminum pulley and a turn knob, so the operator sets the desired speed without changing gear positions.
The stock feeder has a 4-3/4 inch roller diameter and 2-1/4 inch roller width, giving each roller a firm contact patch on typical woodworking stock.
The min - max plate shows the rotation direction needed to obtain the required speed, giving a visual guide for choosing slower or faster feed settings.
The variable speed feeder lists a 0.75 HP motor for a 1-phase machine and a 1 HP motor for a 3-phase machine, aligning motor size with available power supply.
The Maggi Steff variable speed stock feeder with stand has a weight of 155 lbs, which provides substantial mass for stable mounting and feeding.
The Maggi Steff 4 roll stock feeder with stand, in the MAG-VAR4-230-3-KIT configuration, brings 4 rollers, 9 to 59 FPM variable speed, and a 1 HP motor for a 3-phase machine together in one unit. The 4-3/4 inch diameter and 2-1/4 inch width rollers, guided by the conical aluminum pulley system and turn knob speed control, create a feeding setup focused on controllable stock handling. The min - max plate for rotation direction and the 155 lb overall weight further support consistent feeding conditions. For shops that want a variable speed stock feeder aligned with 230V 3-phase supply, these combined details make this VARIOSTEFF 4 unit a practical choice.
Sold In: 1 Each