Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maggi System 23 boring machine provides a 23 spindle 32 mm universal drilling solution, so rows of holes stay aligned on cabinet and panel work using the common 32 mm system. The 0 to 2-1/2 inch adjustable drilling depth with patented spiral setting device lets the operator set depth precisely for different materials and joinery without repeated trial cuts. Two patented quick release material clamps with auto setting hold panels firmly while speeding changeover between parts. A 2 HP motor drives the boring head with power suited to production woodworking. The 37 inch by 13 inch cast iron table supports workpieces on a stable surface that resists deflection under load. Side fences with mechanical digital readout allow repeatable positioning along the table, helping maintain uniform hole locations across multiple parts.
The Maggi System 23 boring machine operates on 3-phase power, aligning it with typical shop electrical service for machinery. Its dimensions of 51-11/16 inches by 37-13/16 inches by 50 inches tall define the floor area and height needed when positioning the machine in a drilling area or production cell. A weight of 630 lbs keeps the frame stable once placed, which supports accurate drilling since the machine resists movement during operation. The foot actuated pneumatic clamps and drill cycle concentrate cycle control at the operator's foot, so workpieces can be held and guided with both hands during setup and boring. The magnetic starter with overload protection manages motor startup and protects the 2 HP motor, supporting consistent operation during repeated drilling cycles.
The Maggi System 23 spindle construction boring machine provides a 23 spindle 32 mm universal drilling solution, fitting cabinet and furniture production that uses the 32 mm system for rows of holes. The 120 inch line boring fence with 4 stops supports drilling along tall cabinet sides or long panels, as the extended fence length and indexed stops keep hole runs referenced to the same edge. Side fences with mechanical digital readout give clear readings when setting fence positions, which is useful for repeating shelf pin or hardware rows across multiple part sizes. The 37 inch by 13 inch cast iron table carries workpieces during the cycle, so narrow and medium-width panels stay supported under the drilling head. Foot actuated pneumatic clamps and drill cycle are well suited to repetitive production, since the operator can load, position, clamp, and cycle the machine quickly while maintaining control over the work.
The 0 to 2-1/2 inch adjustable drilling depth with patented spiral setting device lets the operator dial in depth for different hardware or dowel lengths, which reduces rework from over- or under-drilled holes. Two patented quick release material clamps with auto setting respond to changes in panel thickness without manual adjustment at every load, which helps sustain throughput on mixed-size runs. The 23 quick change chucks speed up bit swaps across the spindle array, so changing drilling patterns or bit diameters does not add extensive downtime. The 2 HP motor and magnetic starter with overload protection work together to supply consistent power and motor protection, which supports continual boring in a shop schedule. With machine dimensions of 51-11/16 inches by 37-13/16 inches by 50 inches tall and a 630 lb weight, the frame forms a solid base that resists vibration, helping hole locations stay accurate across the 23 spindle line.
The Maggi System 23 boring machine provides a 23 spindle 32 mm universal drilling solution, so it is set up for drilling rows of holes on the 32 mm system pattern.
The Maggi System 23 allows 0 to 2-1/2 inch adjustable drilling depth, so hole depth can be matched to dowels or hardware requirements on different materials.
The Maggi System 23 uses two patented quick release material clamps with auto setting and foot actuated pneumatic clamps, which hold panels while allowing fast loading in repetitive drilling.
The Maggi System 23 has a 37 inch by 13 inch cast iron table, providing a rigid support surface for cabinet parts during the drilling cycle.
The Maggi System 23 uses side fences with mechanical digital readout and a 120 inch line boring fence with 4 stops to keep fence positions and hole runs consistent.
The Maggi System 23 has a 2 HP motor and magnetic starter with overload protection, supporting powered boring with motor protection in shop use.
The Maggi System 23 spindle construction boring machine brings a 23 spindle 32 mm universal drilling solution, suited to cabinet and furniture shops using system rows. Its 0 to 2-1/2 inch adjustable drilling depth with patented spiral setting device, 37 inch by 13 inch cast iron table, and side fences with mechanical digital readout support accurate, repeatable boring. The 2 HP motor, magnetic starter with overload protection, and foot actuated pneumatic clamps and drill cycle align with production workflows where consistent drilling and quick part handling matter. For operations that rely on the 32 mm pattern and multi-hole boring, the Maggi System 23 provides the drilling functions and work support detailed here.
Sold In: 1 Each