Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #8 x 1-1/4 inch round washer head screw combines a combination Phillips and square drive, coarse thread, and Type 17 Auger point in a 7000-count production box sized for busy cabinet shops and millwork operations. The round washer head distributes clamping force across a wider bearing surface, making it a practical choice for softwood, engineered panels, and sheet goods where a flush countersink is not required.
The round washer head design makes this screw well suited to applications where the head needs to bear against a surface rather than sit flush inside a countersink. That includes pocket-hole assembly in softwood and sheet goods, drawer box construction, cabinet back panel attachment, and hardware backing in engineered panels. Coarse thread provides strong pull-out resistance in lower-density substrates like particleboard, MDF, and pine. For hardwood face frames requiring a flush, filled finish, a fine-thread flat-head screw is the better fit. This one belongs in softwood and panel joinery where bearing load matters more than a sub-flush head.
The combination drive recess accepts either a #2 Phillips or a #2 square bit, so crews can run whichever driver bit is already loaded without swapping. The square recess is designed to hold the screw on a correctly sized square bit for one-handed placement, which helps in tight spaces and repetitive operations. The Type 17 Auger point carries an extended cutting flute that removes material ahead of the thread as the screw drives, reducing the force needed to start in dense or layered stock. The black finish suits interior applications; this screw is intended for dry, indoor cabinet and millwork work.
Cabinet shops, millwork facilities, and production assembly teams go through #8 x 1-1/4 inch screws in quantity. The 7000-count box keeps a full supply on hand without repeated restocking interruptions. The consistent drive geometry across every screw in the box means the same bit setup runs the entire production run without adjustment.
Yes. The combination drive recess accepts both a #2 Phillips and a #2 square bit, so either works in the same head.
The coarse thread and washer head are sized for softwood, plywood, MDF, and particleboard. Hardwood face frame joinery typically calls for a fine-thread screw with a pan or washer head sized for the specific stock thickness.
No. The washer head is designed to bear against the material surface, not countersink into it. For applications requiring a flush or sub-flush head, a flat countersunk-head screw is the right choice.
The extended auger flute clears wood fibers ahead of the thread as the screw drives, reducing startup torque and the risk of splitting, especially in layered or denser panel materials.
This screw carries a black finish suited for dry, indoor work. For exterior or treated-lumber applications, choose a screw with a corrosion-resistant coating rated for those conditions.
When the driver is loaded and the assembly line is moving, the last thing a production shop needs is an empty fastener bin. This Würth #8 x 1-1/4 inch round washer head screw with a combination drive and Type 17 Auger point delivers consistent performance across softwood and panel joinery, packaged in the quantity that keeps production running.
Sold In: 7000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WW90260 Mfr# 0614176143961 1 | #2 x 6" Square Drive Insert Bit, 2 Piece Bit |